Cut Emissions Buildings & Electricity Enhance Efficiency

Improve District Heating: Buildings

Highly Recommended
Image
District heating facility

A district heating system provides space and water heating to a large number of buildings through an underground distribution system. Improving district heating for buildings reduces GHG emissions from district heating systems for residential and commercial buildings by replacing high-emission heat sources such as fossil fuels and waste-to-energy systems with low-emission sources, including electric boilers, air- or water-source heat pumps, and heat pumps for waste heat. 

Last updated November 4, 2026

Solution Basics

MWh of low-emission heat delivered to buildings

t CO₂-eq (100-yr)/unit
0.16
units/yr
Current 1.3×10⁸ 03.6×10⁸7.2×10⁸
Achievable (Low to High)

Climate Impact

Gt CO₂-eq (100-yr)/yr
Current 0.02 0.060.12
Gradual

CO₂ , CH₄, N₂O

Additional Benefits

183,187
    183
  • 184
  • 185
  • 186
  • 187
  • 188
194

Overview

District heating systems use an underground distribution system to supply space and water heating to a large number of buildings from centralized sources. They are typically found in dense urban areas where heat demand is concentrated in a small area. Although historically reliant on fossil fuels, modern district heating systems can source heat from a variety of alternative sources with lower GHG emissions, including industrial heat pumps, electric boilers, solar heat, deep geothermal heat, and even waste heat from industry, municipal wastewater, and data centers.

This solution targets the integration of low-emission heat sources into existing and new district heating systems. A single low-emission district heating project can cut emissions from hundreds to thousands of buildings at once and tap into low-cost heat sources not otherwise available to individual buildings (International Energy Agency [IEA], 2026). However, the large size of such projects and the need for extensive underground supporting infrastructure can be major barriers to such upgrades.

Changing energy sources can be challenging when low-emission options, especially those that rely on waste heat, supply lower-temperature hot water than the system was designed for. These cases may require upgrades to the distribution system (Guelpa et al., 2023) and buildings (Li & Nord, 2018; Lund et al., 2021), adding cost and complexity to the project. That said, new district heating systems can integrate low-emission sources from the outset and existing systems can be modernized to accept low temperature heat when the infrastructure reaches its end of life or when the roads they are under are also being renewed (IEA, 2026; South West Energy Hub, 2023).

Globally, district heating supplied around 10% of the heating needs of buildings and industry in 2024, with fossil fuels providing nearly 90% of the heat (IEA, 2026). Low-emissions heat from heat recovery, geothermal, solar thermal, electricity and heat pumps accounted for 7% of the heat supplied to district heating systems in 2024 (IEA, 2026). Of all district heat energy, 41% is used for space and water heating in residential and commercial buildings, with the remainder supplying heat to industry and agriculture (see Improve District Heating: Industry) (IEA, 2022a). 

The optimal heat source or combination of low emission heat sources for a district heating system depends on a variety of factors, including availability and cost of heat sources, distribution temperature requirements, distance from waste heat sources, and feasibility of accessing deep geothermal heat or waste heat (IEA, 2026; International Renewable Energy Association [IRENA] et al., 2020). This solution focuses on electric boilers, air- or water-source heat pumps, and heat pumps that concentrate waste heat, all of which are mature technologies that are not geographically restricted. It does not include combined heat and power projects that rely on fossil fuels. We also exclude biomass boilers and municipal waste to heat because these can have GHG emissions comparable to burning fossil fuels (Eriksson & Finnveden, 2009; Gomez et al., 2006) (see Deploy Waste to Energy). 

Impact Calculator

Adjust effectiveness and adoption using range sliders to see resulting climate impact potential.

Effectiveness

0.16
t CO2-eq/MWh of low-emission heat delivered to buildings

Adoption

1.3×10⁸
MWh of low-emission heat delivered to buildings/yr
Low
3.6×10⁸
High
7.2×10⁸
1.3×10⁸
current
Achievable Range

Climate Impact

0.02
Gt CO₂-eq/yr (100-yr)
05
which is the equivalent of
0.04%
of global emissions

The Details

Current State

Shifting district heating systems to low-carbon heat sources can reduce GHG emissions by an average of 0.16 t CO₂‑eq /MWh (20-year and 100-year basis) of heat energy supplied to buildings (Table 1). This is a roughly one-third reduction in emissions from our estimated emissions of current district heating systems (0.45 t CO₂‑eq /MWh 20-year and 100-year basis). 

The emissions reductions are achieved by replacing the combustion of fossil fuels or biomass (including from combined heat and power) with electric boilers and heat pumps (air- or water-source and with waste heat) that generate fewer emissions. The analysis includes the emissions from the electricity used to power heat pumps and electric boilers using a regionally weighted average emissions for electricity. Electricity emissions intensities have been trending downward globally as renewables and low-emission generation are added to power grids (IEA, 2025). If this trend continues, the emissions reductions achievable when switching district heating systems to low-emission alternatives will increase. 

We did not quantify the reduction in pollutants such as nitrogen oxides, sulfur oxides, and particulate matter, which are released when fossil fuels are burned. 

Table 1. Effectiveness at reducing emissions.

Unit: t CO₂‑eq /MWh low-emission heat delivered, 100-year basis

Mean 0.16

We did not calculate the net cost or net cost/t CO₂‑eq avoided because costs vary considerably. The capital cost of installing or retrofitting a district heating system can vary substantially due to factors such as heat output needed; available low-emission heat sources; distribution system size, design, and age; building density; labor costs and workforce capacity; and financing structures (Ceruti et al., 2026; IEA, 2026; Popovski et al., 2023). 

For example (all costs adjusted for inflation to 2023 equivalents): 

  • Copenhagen recently decarbonized the district heating system that serves most of the buildings in the city at a cost of US$83 million (HOFOR, n.d.).

  • Stanford University budgeted US$570 million to convert part of a district heating system serving more than 1,000 buildings to centralized heat pumps (Stanford University, 2013). 

  • Karlovac, Croatia, budgeted US$20.32 million to replace 22 km of underground distribution infrastructure to support future integration of renewable heat sources (European Bank for Reconstruction and Development, 2022). 

Subsidies or public-private partnerships are often needed to finance these investments (IEA Technology Collaboration Programme, 2025). 

Operational costs are based on the fuel used and system efficiencies. Our estimated cost for operating existing district heating systems is US$66/MWh of heating delivered (US$27–175/MWh). This includes a weighted average fuel cost based on the existing fuel mix and assumed 17% distribution network losses, which is an average for existing systems. 

Our estimated cost for operating district heating systems with low-emission heating sources is US$75/MWh of heating delivered (US$38–143/MWh). This is the average outcome for electric boilers, air- or water-source heat pumps, and heat pumps paired with waste heat. We assumed waste heat is produced as a by-product of another process and incurs no additional cost to district heating operators. We assumed the distribution network losses to be 13% based on the average value for newer or energy efficient systems. 

We did not include maintenance costs and the operating costs of the distribution systems, such as pumps and substations, in this analysis.

District heating systems can generate revenues by selling heat to building owners (Liu et al., 2024) and selling electricity from combined heat and power to the grid (Boldrini et al., 2022). Revenue data are typically proprietary, we did not quantify them here due to lack of data. 

As noted above, the cost of retrofitting a district heating system to use low-emission heating sources is not generalizable due to a variety of factors such as geography and system characteristics. We do not anticipate a significant learning curve for such projects.

Speed of action refers to how quickly a climate solution physically affects the atmosphere after it is deployed. This is different from speed of deployment, which is the pace at which solutions are adopted.

At Project Drawdown, we define the speed of action for each climate solution as emergency brake, gradual, or delayed.

Improve District Heating: Buildings is a GRADUAL climate solution. It has a steady, linear impact on the atmosphere. 

Adoption

In 2024, an estimated 130 million MWh of heat from heat recovery, geothermal, solar thermal, electricity, and heat pumps was delivered to district heating for buildings (IEA, 2026; IEA, 2022a) (Table 2). This assumes 41% of all heat delivered to district heating is delivered to buildings, with the rest supplying industry, agriculture and other sectors (IEA, 2022a).

This current adoption value overestimates district heating as we have defined it because it also includes geothermal and solar thermal heat. We did not include these heat sources in our analysis because insufficient data exist to estimate their potential contribution to effectiveness and future adoption globally but IEA (2026) reports district heating from heat recovery, geothermal, solar thermal, electricity, and heat pumps together. 

Current adoption is concentrated in countries that have invested in policies, planning, and other support for low-emission heat for district heating (IEA, 2026). This includes many European countries (IEA, 2026). Economics and regulation are often the main barriers to greater adoption (IEA, 2026).

Iceland is a notable leader in the adoption of low-emissions district heating systems, with geothermal heat originating from deep in the Earth providing more than 90% of the heat (Piel et al., 2023). China and Russia, where nearly 75% of global district heating energy is used, still rely heavily on coal and natural gas (IEA, 2026). 

Table 2. Current adoption level (2024), estimated from IEA (2026).

Unit: MWh low-emission district heat delivered/yr

Estimate 130,000,000

We estimated that 5.3 million MWh/yr of heat delivered from low-emissions district heating sources are added per year based on IEA (2026) values (Table 3). Because total demand for district heating varies with weather (Dahl et al., 2017), we used a wide range of years, 2000–2024, to estimate the trend in heat delivered from low-emissions district heating sources. We used adoption trend data from IEA (2026), which includes district energy supplied by heat recovery, geothermal, solar thermal, electricity, and heat pumps, and adjusted for the percentage supplied to buildings (IEA, 2022a). 

This estimate includes both new district heating systems designed to use low-emission heat from the outset and district heating systems that have converted from fossil fuels or biomass to low-emissions sources of heat. The value overestimates the solution as we have defined it because it includes geothermal and solar thermal heat. 

Historical rates of adoption may not be indicative of future rates. The 2018 Renewable Energy Directive for the EU (European Union) set a target of increasing the share of renewable or waste heat for district heating by an average of 2.3%/yr until 2030 (European Commission, 2022). Although this target has not been achieved, many projects are already underway (Interreg Central Europe, n.d.). Furthermore, nearly half of district heat energy is used in China (IEA, 2026), where the government has set aggressive targets for the adoption of renewables, including for district heating (Yuan et al., 2024), and where geothermal district heating has already grown 2.5-fold over five years (IEA, 2026). In these plans, renewable district heating includes biomass, which releases GHG emissions comparable to fossil fuels (Eriksson & Finnveden, 2009; Gomez et al., 2006). 

Table 3. Adoption trend.

Unit: annual change in MWh low-emission heat delivered/yr

Estimate 5,300,000

If all of the current district heating systems for buildings were to switch to low-emission sources of heat, that would amount to 2.2 billion MWh/yr of low-emission heat (Table 4). This assumes no new district heating systems are added and that the annual heating needs of currently connected buildings do not change. In fact, annual building heating needs are expected to decrease as a consequence of global warming (Spinoni et al., 2021) and improvements to the insulation and air sealing of buildings (Mastrucci et al., 2021).

Table 4. Adoption ceiling.

Unit: MWh low-emission heat delivered/yr

Estimate 2,200,000,000

We estimated that by 2050, low-emission heat sources could account for 360–720 million MWh/yr of the heat supplied to district heating systems (Table 5).

For the high achievable adoption outcome, we assumed the European Union’s RePowerEU goal of increasing renewables in its district heating and cooling systems by 2.3%/yr until 2030 (European Commission, 2022) is achieved and also extended to 2050. Further, we assumed only half of this goal is achievable globally when biomass is excluded. This would result in 720 million MWh/yr of low-emission heat being delivered to buildings in district heating systems, or 32% of today’s district heating demand for buildings. IRENA et al. (2020) projected that renewables will make up 77% of district heat energy in 2050 under the Transforming Energy Scenario, much of which is likely to be from biomass.

We assumed half of the high achievable outcome is feasible for the low achievable outcome, which results in 360 million MWh/yr of low-emission heat delivered, 16% of today’s district heating demand for buildings.

Retrofitting a district heating system to use low-emission heating sources can have big wins for emissions because a single system can serve hundreds to hundreds of thousands of buildings. However, it can take many years to plan and implement changes to a district heating system. 

Table 5. Range of achievable adoption levels.

Unit: MWh low-emission district heating delivered to buildings/yr

Current adoption 130,000,000
Achievable – low 360,000,000
Achievable – high 720,000,000
Adoption ceiling 2,200,000,000

Impacts

Currently deployed low-emission heating in district heating systems for buildings reduces GHG emissions by 0.02 Gt CO₂‑eq/yr (100- and 20-year basis) (Table 6).

If all current district heating systems for buildings were to adopt low-emission heat sources, emissions would be reduced by 0.36 Gt CO₂‑eq/yr (100- and 20-year basis).

We estimate the achievable range to be 0.06–0.12 Gt CO₂ eq/yr (100- and 20-year basis). These values are based on RePowerEU’s target of 2.3%/yr increase in adoption of renewable energy for district heating (European Commission, 2022) with an assumed half of this coming from electric boilers, air- or water-source heat pumps, and waste heat.

Future climate impacts may be higher than estimated here because GHG emissions from the electricity used to power electric boilers and heat pumps are expected to decrease as more renewables are added to electricity grids worldwide (IEA, 2025). Furthermore, climate impacts shown here are based only on converting existing systems to low-emission district heating. 

Table 6. Climate impact at different levels of adoption.

Unit: Gt CO₂‑eq/yr, 100-yr basis

Current adoption 0.02
Achievable – low 0.06
Achievable – high 0.12
Adoption ceiling 0.36

Income and Work

Research on the direct benefits of district heating using low-emission sources is very limited. In general, systematic reviews have found that energy systems with a greater share of renewable fuels are associated with more jobs than those based on fossil fuels (Hanna et al., 2024). Lower-carbon heating systems tend to create more demand for local employment (Cavillo et al., 2025). Employment sectors like construction, installation, and manufacturing are associated with more job-years per megawatts thermal for lower-carbon heating technologies and fuels (such as district heating) compared with gas or oil heating (Hanna et al., 2024).

Health

Integrating low-emission sources decreases exposure to air pollutants such as mercury and fine particulate matter generated by fossil fuel–based power plants, thereby improving the health of nearby communities (U.S. Environmental Protection Agency [EPA], 2025). These pollutants have been linked to increased morbidity from cardiovascular and respiratory disease, asthma, infections, and cancer (Gasparotto & Martinello, 2021) and to increased risk of mortality (Henneman et al., 2023).

Air Quality

Reducing GHG emission sources will reduce the amount of air pollution associated with burning higher carbon sources such as CO₂, nitrogen oxides, methane, mercury, and fine particulate matter (Paardekooper et al., 2020; U.S. EPA, 2025). Strategies that reduce GHG emissions from district heating, such as thermal storage, can lower peak power demand (Kauko et al., 2025). Reducing this demand lowers the number of hours required to run boilers, which can further reduce air pollution from these heating systems (Suhoenen et al., 2023).

Other

We did not include the up-front cost of installing low-emission district heating sources and upgrading distribution networks in this analysis due to the complexity of the projects. We also assume waste heat is free, which is likely for some sources such as wastewater but not others such as waste heat from industry. 

While some existing networks can add low-emission heating without upgrades to the supporting infrastructure, most will require such investments (IEA, 2026). For example, the entire underground distribution network may need modernization to accept lower temperature water and heat inputs from smaller, distributed sources such as data centers (IEA Technology Collaboration Programme, 2025). Electricity network investments may also be required to support electrified district heating, including new generation, transmission, and distribution infrastructure, plus demand management to minimize peaks (IEA, 2023).

District heating systems are often very large, serving whole communities and sometimes entire cities. Adding low-emission heating sources can be a major undertaking involving years of planning and implementation (IEA, 2022), which risks cost overruns and delays, especially for larger systems. Lack of skilled personnel is another barrier (IEA Technology Collaboration Programme, 2025).

Many low-emission district heat options rely on heat pumps to move and concentrate heat. Heat pump refrigerants often have high global warming potential and can contribute to climate change when they leak. Most countries have signed on to the Kigali Amendment, which commits them to phase out the production and use of these refrigerants and replace them with alternatives with lower global warming potentials (Amendment to the Montreal Protocol on Substances That Deplete the Ozone Layer, 2016).

Individual buildings may disconnect from the district heating system if alternatives, such as heat pumps located within the building, prove to be more cost effective (Kontu et al., 2020). When multiple buildings leave, it can put the long term economic viability of the district heating system at risk (Lygnerud, 2018). 

Replacing coal-based combined heat and power plants in China with low-emission alternatives also has the potential to increase heating costs, especially for low-income households (Wang et al., 2023). 

Embodied carbon emissions associated with retrofitting a district heating system to use low-carbon heating sources could be significant, especially if upgrades to buildings and distribution systems are needed (Butters et al., 2024).

Competing

As district heating systems shift to low-emission heat sources, the emissions impacts of building upgrades that affect heating and cooling loads will decrease.

Consensus of effectiveness in reducing GHG emissions from district heating systems that serve buildings: High

The IEA (2026) reviews the role that renewables, including bioenergy, geothermal, solar thermal, waste heat and heat pumps play in district heating systems globally. It notes that the “technologies needed to decarbonise district energy are commercially available and increasingly cost-competitive,” and the main challenges to deployment are economics and regulation. 

Malcher et al. (2025) reviewed 42 life-cycle assessment studies and found waste heat and deep geothermal heat had among the lowest life-cycle carbon intensities for district heating, followed by systems that use heat pumps. Biomass carbon intensities were highly variable, ranging from comparable to waste heat at the low end and comparable to gas boilers at the high end. Other factors, such as the use of lower temperature distribution systems, integration of thermal storage, and use of combined heat and power, as well as subsidies, also had the potential to reduce emissions. 

Jodeiri et al. (2022) outlined sustainable heat options for lower temperature district heating, highlighting their lower network heat loss and ability to use waste heat from a variety of sources. Challenges for sustainable heat options include temporal mismatches between many sustainable heat supplies and demand (i.e., not dispatchable), uncertain long-term industrial waste heat supply, technical maturity of heat recovery systems, long payback periods, and incentive structures that disadvantage urban waste heat recovery. 

The results presented in this document summarize findings from 16 reports, three original studies, three datasets, and two market reports reflecting current evidence from 10 countries, primarily China, Russia, Europe, and the United States. We recognize this limited geographic scope creates bias, and hope this work inspires research and data sharing on this topic in underrepresented regions.

Take Action

Looking to get involved? Below are some key actions for this solution that can get you started, arranged according to different roles you may play in your professional or personal life.

These actions are meant to be starting points for involvement and are not intended to be prescriptive or necessarily suggest they are the most important or impactful actions to take. We encourage you to explore and get creative!

Lawmakers and Policymakers

  • Set ambitious renewable energy and fossil fuel phaseout goals at the national level; set ambitious targets for improving district heating systems at the municipal level where relevant. 
  • Coordinate and develop national and local plans to transition to improved district heating systems and align incentives and regulations; integrate district heating into resource planning, especially in the electricity sector; use extensive national planning and high-quality heat maps to determine where improved district heating is feasible; identify other solutions where it is not feasible.
  • Explore ways to add cooling to district heating networks while transitioning to low-emission heat sources. 
  • When possible, coordinate municipal construction, such as infrastructure development, with improving district heating systems.
  • Provide financial incentives, including subsidies, grants, blended finance, green bonds, and/or tax credits, for district heating providers based on emissions reductions; extend financial incentives to thermal storage and supportive infrastructure; gradually phase out incentives as the market matures to stabilize markets.
  • Offer grants and technical support to local governments to conduct feasibility and heat map studies for improving local district heating systems.
  • Institute carbon taxes in district heating networks.
  • Invest in heat storage strategies and systems.
  • Use financial incentives such as subsidies, tax credits, feed-in-tariffs, and auctions to support low-emission heating technologies such as heat pumps; ensure incentives and grant programs are timely and streamlined for applicants; gradually reduce these incentives to stabilize markets.
  • Apply or require uniform and transparent cost and tariff structures for customers, relying mainly on consumption-based billing; ensure cost-coverage is reached, raising tariffs gradually if necessary.
  • If relevant, consider policies to regulate the natural monopolies for improved district heating systems, such as third-party access to distribution pipes or those that incentivize public or nonprofit ownership; ensure regulations allow for other models such as thermal communities and co-ownership. 
  • Require improved district heating companies to provide customers notices of their rights in a clear and transparent manner.
  • Deploy digital tools to manage improved district heating systems, including the physical network, Internet of Things, and intelligent decision systems.
  • Co-design improved district heating projects with the local community; ensure community engagement starts early and is transparent, inclusive, and ongoing; solicit feedback from the local community – including from opposition groups – on location, design, finance, and mitigation; ensure finalized projects address relevant sociological, agricultural, and ecological considerations; at the national level, consider mandating thorough and ongoing community engagement for district heating systems.
  • Join, create, or participate in public-private partnerships dedicated to de-risking markets, deployment, technology transfers, education, and other relevant areas.

Practitioners

  • Take advantage of government incentives such as subsidies, grants, guarantees, concessional loans, public investments, and tax credits as the market matures and becomes competitive; gradually reduce your reliance on these incentives to create long-term market stability.
  • Consider using green bonds to finance public projects or derisk markets.
  • Ensure customer service is high quality and allows for quick access to human support specialists; respect customer rights and clearly and transparently inform customers of their rights.
  • Use digital monitoring and operating systems to improve efficiency; invest in R&D to improve digital systems if needed; integrate customer data while protecting privacy to optimize operations.
  • Consider alternative models to ownership, such as thermal communities and allowing consumers to co-own and co-finance operations.
  • Help develop national and local plans to transition to improved district heating systems and to align incentives and regulations; help integrate district heating into resource planning, especially, in the electricity sector; build capacity in digital automation, particularly at the local level, to facilitate transitions; support national plans in determining where improving district heating is feasible using extensive planning and high-quality heat maps.
  • When possible, coordinate municipal construction, such as infrastructure development, with construction to improve district heating systems.
  • Take advantage of grants and technical support to local governments to conduct feasibility and heat map studies to assess improving district heating systems.
  • Invest in heat storage strategies and systems.
  • Apply uniform and transparent cost and tariff structures for customers, relying mainly on consumption-based billing; ensure that costs are covered, raising tariffs gradually if necessary.
  • Provide customers notices of their rights in a clear and transparent manner.
  • Deploy digital tools to manage improved district heating systems, including the physical network, Internet of Things, and intelligent decision systems.
  • Create and promote technical workforce and professional development programs; develop the full range of capacity building that addresses every step of the value chain, including engineering, construction, operations, maintenance, and business management.
  • Integrate tools such as AI to manage operations; educate stakeholders on the role of digitalization, especially, at the local level; invest in R&D to improve digital management systems if necessary.
  • Co-design improved district heating projects with the local community; ensure community engagement starts early and is transparent, inclusive, and ongoing; solicit feedback from the local community, including from opposition groups, on location, design, finance, and mitigation; ensure finalized projects address relevant sociological, agricultural, and ecological considerations.
  • Join, create, or participate in public-private partnerships dedicated to de-risking markets, deployment, technology transfers, education, and other relevant areas.

Business Leaders

  • Help develop business models for district heating systems that can be repeated and scaled in different environments.
  • Invest directly in district heating systems; seek to provide long-term support; communicate to employees, customers, and other stakeholders how improved district heating supports corporate net-zero strategies.
  • Participate in community engagement processes and co-design improved district heating projects with the local community; help educate the public and highlight the local economic benefits of improved district heating systems.
  • Offer pro bono business advice or general support for district heating systems.
  • Join, create, or participate in public-private partnerships dedicated to de-risking markets, deployment, technology transfers, education, and other relevant areas.

Nonprofit Leaders

  • Operate improved district heating systems and/or help form thermal communities in relevant areas.
  • Advocate for ambitious renewable energy and fossil fuel phaseout goals at the national level; advocate ambitious targets for improving district heating systems at the municipal level where relevant. 
  • Help coordinate and develop national and local plans to transition to low-carbon district heating systems and align incentives and regulations; help integrate district heating into resource planning, especially in the electricity sector; help with the national process of planning and help build high-quality heat maps.
  • When possible, help coordinate municipal construction, such as infrastructure development, with construction to improve district heating systems to save costs and mitigate disruptions.
  • Advocate for financial incentives, including subsidies, grants, blended finance, green bonds, and/or tax credits for district heating providers based on emissions reductions; advocate for extending financial incentives to thermal storage and supportive infrastructure; suggest gradually phasing out incentives as the market matures to stabilize markets.
  • Offer technical support to local governments to conduct feasibility and heat map studies for improving local district heating systems.
  • Advocate for carbon taxes in district heating networks.
  • Support efforts to develop heat storage strategies and systems. Help inform customers of their rights in a clear and transparent manner; advocate for requirements to provide customers with a clear description of their rights.
  • Advocate for phasing out the use of fossil fuels in district heating, starting with coal-fired plants.
  • Help co-design improved district heating projects with the local community; ensure community engagement starts early and is transparent, inclusive, and ongoing; solicit feedback from the local community, including from opposition groups, on location, design, finance, and mitigation; ensure finalized projects address relevant sociological, agricultural, and ecological considerations; advocate for regulatory requirements for thorough and ongoing community engagement when improving district heating systems.
  • Join, create, or participate in public-private partnerships dedicated to de-risking markets, deployment, technology transfers, education, and other relevant areas.

Investors

  • Invest in companies improving district heating systems where relevant; ensure projects include thorough community engagement. 
  • Offer low-interest loans and concessional financing for companies improving district heating systems.
  • Shift energy and broader investment portfolios toward renewable energy and other supportive technologies, particularly heat pumps. 
  • Invest in green bonds and/or explore blended finance structures to mobilize capital for companies improving district heating systems or supporting infrastructure.
  • Invest in R&D for related technologies such as improving heat storage technologies.
  • Align investments with existing public-private partnerships, voluntary agreements, or voluntary guidance that may apply in the location of the investment (including those that apply to biodiversity).

Philanthropists and International Aid Agencies

  • Award grants to companies improving district heating systems where relevant; ensure projects include thorough community engagement. 
  • Offer low-interest loans and concessional financing for companies improving district heating systems.
  • Issue or invest in green bonds and/or explore blended finance structures to mobilize capital for companies improving district heating systems or supporting infrastructure.
  • Offer grants for R&D on related technology, such as improving heat storage technologies.
  • Help create nonprofits or thermal communities to administer improved district heating systems in relevant areas.
  • Advocate for ambitious renewable energy and fossil-fuel phase-out goals at the national level; advocate for ambitious targets for improving district heating systems at the municipal level where relevant. 
  • Help coordinate and develop national and local plans to transition to improved district heating systems and align incentives and regulations; help integrate district heating into resource planning, especially, in the electricity sector; help in the national process of planning and help build high-quality heat atlases; help identify other solutions for areas where it is not feasible.
  • When possible, help coordinate municipal construction, such as infrastructure development, with construction to improve district heating systems to save costs and mitigate disruptions.
  • Advocate for financial incentives, including subsidies, grants, blended finance, green bonds, and/or tax credits for district heating providers based on emissions reductions; extend financial incentives to thermal storage and supportive infrastructure; suggest gradually phasing out incentives as the market matures to stabilize markets.
  • Offer grants and technical support to local governments to conduct feasibility and heat map studies for improving local district heating systems.
  • Advocate for carbon taxes in district heating networks.
  • Help inform customers of their rights in a clear and transparent manner.
  • Advocate for phasing out the use of fossil fuels in district heating, starting with coal-fired plants.
  • Help co-design improved district heating projects with the local community; ensure community engagement starts early and is transparent, inclusive, and ongoing; solicit feedback from the local community, including from opposition groups, on location, design, finance, and mitigation; ensure finalized projects address relevant sociological, agricultural, and ecological considerations; advocate for regulatory requirements for thorough and ongoing community engagement when improving district heating systems.
  • Join, create, or participate in public-private partnerships dedicated to de-risking markets, deployment, technology transfers, education, and other relevant areas.

Thought Leaders

  • Advocate for ambitious renewable energy and fossil fuel phaseout goals at the national level; advocate for ambitious targets for improving district heating systems at the municipal level where relevant. 
  • Help coordinate and develop national and local plans to transition to improved district heating systems and align incentives and regulations; help integrate district heating into resource planning, especially, in the electricity sector; and help build high-quality heat atlases.
  • Advocate for financial incentives, including subsidies, grants, blended finance, green bonds, and/or tax credits for district heating providers based on emissions reductions; advocate for extending financial incentives to thermal storage and supportive infrastructure; suggest gradual phaseout incentives as the market matures to stabilize markets.
  • Offer technical support to local governments to conduct feasibility and heat map studies for improving local district heating systems.
  • Advocate for carbon taxes in district heating networks.
  • Support R&D and other efforts to develop heat storage strategies and systems.
  • Help inform customers of their rights in a clear and transparent manner; advocate for requirements to provide customers with a clear description of their rights.
  • Advocate for phasing out the use of fossil fuels in district heating, starting with coal-fired plants. 
  • Help co-design improved district heating projects with the local community; ensure community engagement starts early and is transparent, inclusive, and ongoing; solicit feedback from the local community, including from opposition groups, on location, design, finance, and mitigation; ensure finalized projects address relevant sociological, agricultural, and ecological considerations; advocate for regulatory requirements for thorough and ongoing community engagement when improving district heating systems.

Technologists and Researchers

  • Create publicly accessible online databases of heat maps, energy grids, renewable energy access, opportunities for improving district heating systems, and relevant information on infrastructure; identify municipalities suitable for improving district heating and connection opportunities for users, producers, and renewable energy providers.
  • Advance heat storage technologies; compare and test power-to-heat conversions with comparable storage options.
  • Advance digitalization of district heating systems, particularly in emerging areas such as the Internet of Things, artificial intelligence, and automation; seek to build efficient systems while protecting data and privacy.

Communities, Households, and Individuals

  • Call on governments and developers to use transparent, inclusive, and ongoing community engagement; participate in these processes when possible to co-design improved district heating systems; provide and help collect feedback on location, design, finance, mitigation, and distribution of benefits; help ensure projects address relevant sociological, agricultural, and ecological considerations.
  • Advocate for ambitious renewable energy and fossil fuel phaseout goals at the national level; advocate for ambitious targets for improving district heating systems at the municipal level where relevant. 
  • Advocate for financial incentives, including subsidies, grants, blended finance, green bonds, and/or tax credits for district heating providers based on emissions reductions; advocate for extending financial incentives to thermal storage and supportive infrastructure; suggest gradual phaseout incentives as the market matures to stabilize markets.
  • Advocate for carbon taxes in district heating networks.
  • Advocate for phasing out the use of fossil fuels in district heating, starting with coal-fired plants. 
  • Participate in public awareness campaigns focused on improved district heating systems; share information with your community and networks.

References

Amendment to the Montreal Protocol on substances that deplete the ozone layer. (2016, October 15). Link to source: https://treaties.un.org/doc/Treaties/2016/10/20161015%2003-23%20PM/Ch_XXVII-2.f-English%20and%20French.pdf 

Boldrini, A., Jiménez Navarro, J. P., Crijns-Graus, W. H. J., & Van Den Broek, M. A. (2022). The role of district heating systems to provide balancing services in the European Union. Renewable and Sustainable Energy Reviews, 154, Article 111853. Link to source: https://doi.org/10.1016/j.rser.2021.111853  

Butters, C., Cheshmehzangi, A., & Bakhshoodeh, R. (2024). Sustainable Construction: The embodied carbon impact of infrastructures and landscaping. Urban Science, 8(3), Article 76. Link to source: https://doi.org/10.3390/urbansci8030076

Calvillo, C. F., Katris, A., Zhou, L., & Turner, K. (2025). Jobs, skills and regional implications of the low carbon residential heat transition in the UK. Energy Policy, 202, Article 114579. Link to source: https://doi.org/10.1016/j.enpol.2025.114579 

Ceruti, A., Lambert, J., Trentmann, L., Schweiger, B., & Spliethoff, H. (2026). What drives district heating network costs? A global sensitivity assessment. Energy, 360, Article 141685. Link to source: https://doi.org/10.1016/j.energy.2026.141685

Con Edison. (2024). 2024 Steam decarbonization study & implementation plan. Link to source: https://www.coned.com/-/media/files/coned/documents/for-commercial-industries/steam/why-steam/steam-decarbonization-study.pdf

Dahl, M., Brun, A., & Andresen, G. B. (2017). Using ensemble weather predictions in district heating operation and load forecasting. Applied Energy, 193, 455–465. Link to source: https://doi.org/10.1016/j.apenergy.2017.02.066 

Eriksson, O., & Finnveden, G. (2009). Plastic waste as a fuel—CO2-neutral or not? Energy & Environmental Science, 2(9), 907–914. Link to source: https://doi.org/10.1039/b908135f 

European Bank of Reconstruction and Development. (2022). Karlovac district heating project. Link to source: https://www.ebrd.com/content/dam/ebrd_dxp/documents/project/52899/grcf2-w2-e2--karlovac-district-heating-project-board-report.pdf

European Commission. (2022). Implementing the repower EU action plan: Investment needs, hydrogen accelerator and achieving the bio-methane targets. Link to source: https://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=CELEX:52022SC0230 

Gasparotto, J., & Da Boit Martinello, K. (2021). Coal as an energy source and its impacts on human health. Energy Geoscience, 2(2), 113–120. Link to source: https://doi.org/10.1016/j.engeos.2020.07.003 

Gomez, D. R., Watterson, J. D., Americano, B. B., Ha, C., Marland, G., Matsika, E., Namayanga, L. N., Osman-Elasha, B., Kalenga Saka, J. D., & Treanton, K. (2006). Chapter 2: Stationary combustion. In 2006 IPCC guidelines for national greenhouse gas inventories. Link to source: https://www.ipcc-nggip.iges.or.jp/public/2006gl/pdf/2_Volume2/V2_2_Ch2_Stationary_Combustion.pdf 

Guelpa, E., Capone, M., Sciacovelli, A., Vasset, N., Baviere, R., & Verda, V. (2023). Reduction of supply temperature in existing district heating: A review of strategies and implementations. Energy, 262, Article 125363. Link to source: https://doi.org/10.1016/j.energy.2022.125363 

Hanna, R., Heptonstall, P., & Gross, R. (2024). Job creation in a low carbon transition to renewables and energy efficiency: A review of international evidence. Sustainability Science, 19(1), 125–150. Link to source: https://doi.org/10.1007/s11625-023-01440-y 

Henneman, L., Choirat, C., Dedoussi, I., Dominici, F., Roberts, J., & Zigler, C. (2023). Mortality risk from United States coal electricity generation. Science, 382, 941-946. Link to source: https://science.org/doi/10.1126/science.adf4915 

HOFOR. (n.d.). District heating. HOFOR. Retrieved July 30, 2025, from Link to source: https://www.hofor.dk/english/hofor-utilities/district-heating/ 

IEA. (2022a). Global annual heat deliveries to end-use sectors through district heating networks, 2002-2021. Link to source: https://www.iea.org/data-and-statistics/charts/global-annual-heat-deliveries-to-end-use-sectors-through-district-heating-networks-2000-2021 

IEA. (2022b). 350 million building units connected to district energy networks by 2030, provide about 20% of space heating needs. Link to source: https://www.iea.org/reports/350-million-building-units-connected-to-district-energy-networks-by-2030-provide-about-20-of-space-heating-needs 

IEA. (2023). Electricity grids and secure energy transitions. Link to source: https://iea.blob.core.windows.net/assets/ea2ff609-8180-4312-8de9-494bcf21696d/ElectricityGridsandSecureEnergyTransitions.pdf 

IEA. (2025). Electricity 2025. Link to source: https://www.iea.org/reports/electricity-2025  

IEA. (2026). Renewables in district energy [report]. Link to source: https://iea.blob.core.windows.net/assets/af971612-a456-495e-8c55-5d13bc281962/RenewablesinDistrictEnergy.pdf 

IEA Technology Collaboration Programme. (2025). Guidebook for the integration of renewable energy sources into existing district heating and cooling systems. Link to source: https://www.iea-dhc.org/fileadmin/documents/Annex_TS5/Final_Draft_Version/Guidbook_TS5.pdf 

Interreg Central Europe. (n.d.). Heat 35. Link to source: https://www.interreg-central.eu/projects/heat-35/ 

IRENA, IEA, & REN21. (2020). Renewable energy policies in a time of transition: Heating and cooling. Link to source: https://www.irena.org/-/media/Files/IRENA/Agency/Publication/2020/Nov/IRENA_IEA_REN21_Policies_Heating_Cooling_2020.pdf 

Jodeiri, A. M., Goldsworthy, M. J., Buffa, S., & Cozzini, M. (2022). Role of sustainable heat sources in transition towards fourth generation district heating – A review. Renewable and Sustainable Energy Reviews, 158, Article 112156. Link to source: https://doi.org/10.1016/j.rser.2022.112156 

Kauko, H., Delgado, B. M., Backe, S., & Sartori, I. (2025). Reducing electricity demand and enhancing heat supply flexibility through energy efficiency and district heating. Energy, 322, Article 135310. Link to source: https://doi.org/10.1016/j.energy.2025.135310 

Kontu, K., Vimpari, J., Penttinen, P., & Junnila, S. (2020). Individual ground source heat pumps: Can district heating compete with real estate owners’ return expectations? Sustainable Cities and Society, 53, Article 101982. Link to source: https://doi.org/10.1016/j.scs.2019.101982 

Li, H., & Nord, N. (2018). Transition to the 4th generation district heating—Possibilities, bottlenecks, and challenges. Energy Procedia, 149, 483–498. Link to source: https://doi.org/10.1016/j.egypro.2018.08.213 

Liu, S., Guo, Y., Wagner, F., Liu, H., Cui, R. Y., & Mauzerall, D. L. (2024). Diversifying heat sources in China’s urban district heating systems will reduce risk of carbon lock-in. Nature Energy, 9(8), 1021–1031. Link to source: https://doi.org/10.1038/s41560-024-01560-4  

Lund, H., Østergaard, P. A., Nielsen, T. B., Werner, S., Thorsen, J. E., Gudmundsson, O., Arabkoohsar, A., & Mathiesen, B. V. (2021). Perspectives on fourth and fifth generation district heating. Energy, 227, Article 120520. Link to source: https://doi.org/10.1016/j.energy.2021.120520 

Lygnerud, K. (2018). Challenges for business change in district heating. Energy, Sustainability and Society, 8, Article 20. Link to source: https://doi.org/10.1186/s13705-018-0161-4 

Malcher, X., Tenorio-Rodriguez, F. C., Finkbeiner, M., & Gonzalez-Salazar, M. (2025). Decarbonization of district heating: A systematic review of carbon footprint and key mitigation strategies. Renewable and Sustainable Energy Reviews, 215, Article 115602. Link to source: https://doi.org/10.1016/j.rser.2025.115602  

Mastrucci, A., Van Ruijven, B., Byers, E., Poblete-Cazenave, M., & Pachauri, S. (2021). Global scenarios of residential heating and cooling energy demand and CO2 emissions. Climatic Change, 168(3–4), Article 14. Link to source: https://doi.org/10.1007/s10584-021-03229-3 

Paardekooper, S., Lund, H., Chang, M., Nielsen, S., Moreno, D., & Thellufsen, J. Z. (2020). Heat Roadmap Chile: A national district heating plan for air pollution decontamination and decarbonisation. Journal of Cleaner Production, 272, Article 122744. Link to source: https://doi.org/10.1016/j.jclepro.2020.122744

Piel, E., Mata, C., Lucas, P., & Pesce, G. (2023). DHC market outlook insights & trends. Euroheat & Power. Link to source: https://api.euroheat.org/uploads/DHC_Market_Outlook_Insights_Trends_2023_36d6fe8924.pdf 

Popovski, E., Ragwitz, M., & Brugger, H. (2023). Decarbonization of district heating and deep retrofits of buildings as competing or synergetic strategies for the implementation of the efficiency first principle. Smart Energy, 10, Article 100096. Link to source: https://doi.org/10.1016/j.segy.2023.100096 

South West Energy Hub. (2023). Local energy guide [report]. Link to source: https://www.swnetzerohub.org.uk/wp-content/uploads/2023/03/Local-Energy-Guide_inc-app-and-CSs-1.pdf

Spinoni, J., Barbosa, P., Füssel, H., McCormick, N., Vogt, J. V., & Dosio, A. (2021). Global population‐weighted degree‐day projections for a combination of climate and socio‐economic scenarios. International Journal of Climatology, 41(11), 5447–5464. Link to source: https://doi.org/10.1002/joc.7328

Stanford University. (2013). 2013 APPA award application - effective & innovative practices. Link to source: https://www1.appa.org/membershipawards/documents/Stanford%20University.pdf 

Suhonen, J., Lindholm, J., Verbeck, M., Ju, Y., Jokisalo, J., Kosonen, R., Janßen, P., & Schäfers, H. (2023). Energy, cost and emission saving potential of demand response and peak power limiting in the German district heating system. International Journal of Sustainable Energy, 42(1), 1092–1127. Link to source: https://doi.org/10.1080/14786451.2023.2251601 

U.S. Environmental Protection Agency. (2025). Power sector programs—Progress report. Link to source: https://www.epa.gov/power-sector/progress-report 

Voswinkel, F., Delmastro, C., Reidenbach, B., & Kwarnstrom, O. (2025). Opportunities for district heating in the changing energy landscape. IEA. Link to source: https://www.iea.org/commentaries/opportunities-for-district-heating-in-the-changing-energy-landscape 

Wang, Z., Li, H., Zhang, B., Wang, B., Li, H., Tian, X., Lin, J., & Feng, W. (2023). Unequal residential heating burden caused by combined heat and power phase-out under climate goals. Nature Energy, 8(8), 881–890. Link to source: https://doi.org/10.1038/s41560-023-01308-6 

Yuan, M., Vad Mathiesen, B., Schneider, N., Xia, J., Zheng, W., Sorknæs, P., Lund, H., & Zhang, L. (2024). Renewable energy and waste heat recovery in district heating systems in China: A systematic review. Energy, 294, Article 130788.  Link to source: https://doi.org/10.1016/j.energy.2024.130788 

Credits

Lead Fellow

  • Heather McDiarmid, Ph.D

Contributors

  • Ruthie Burrows, Ph.D.

  • James Gerber, Ph.D.

  • Daniel Jasper

  • Alex Sweeney

Internal Reviewers

  • Henry Igugu, Ph.D. 

  • Amanda D. Smith, Ph.D.

  • Christina Swanson, Ph.D.

Methods and Supporting Data

  • Greenhouse gas quantity expressed relative to CO₂ with the same warming impact over 100 years, calculated by multiplying emissions by the 100-yr GWP for the emitted gases.

  • Greenhouse gas quantity expressed relative to CO₂ with the same warming impact over 20 years, calculated by multiplying emissions by the 20-yr GWP for the emitted gases.

  • 8th World Congress on Conservation Agriculture

  • Reducing greenhouse gas concentrations in the atmosphere by preventing or reducing emissions.

  • A liquid with a low pH (below 7).

  • The process of increasing acidity.

  • The extent to which emissions reduction or carbon removal is above and beyond what would have occurred without implementing a particular action or solution.

  • An upper limit on solution adoption based on physical or technical constraints, not including economic or policy barriers. This level is unlikely to be reached and will not be exceeded.

  • The quantity and metric to measure implementation for a particular solution that is used as the reference unit for calculations within that solution.

  • A composting method in which organic waste is processed in freestanding piles that can be aerated actively with forced air or passively by internal convection.

  • The interactions of aerodynamic forces and flexible structures, often including the stucture's control system.

  • A process in which microbes break down organic materials in the presence of oxygen. This process converts food and green waste into nutrient-rich compost.

  • Establishment of new forests in areas that did not historically support forests.

  • Land that is used for crop cultivation and livestock grazing, including cropland, meadows, and pastures.

  • Farming practices that work to create socially and ecologically sustainable food production.

  • Addition of trees and shrubs to crop or animal farming systems.

  • Artificial intelligence

  • Automatic leak detection system

  • Abandoned mine methane

  • Spread out the cost of an asset over its useful lifetime.

  • A process in which microorganisms break down organic material in the absence of oxygen. Methane and CO₂ are the main byproducts.

  • A crop that live one year or less from planting to harvest; also called annual.

  • Lacking dissolved oxygen but containing other sources of oxygen bound within molecules that can be stripped and used by microorganisms.

  • aerated static piles

  • Hardware required to support PV modules and arrays, including racking and mounting structures, wires, and other physical components.

  • Building automation system

  • Electric power delivered at a steady, around-the-clock rate, to cover power demand that exists at all times. Baseload power is typically supplied by high availability, low operating-cost plants, such as nuclear or geothermal.

  • A liquid with a high pH (above 7).

  • black carbon

  • Solar panels that generate electricity from sunlight captured on both sides, increasing energy output by reflecting light from the ground and surroundings.

  • Made from material of biological origin, such as plants, animals, or other organisms.

  • A renewable energy source generated from organic matter from plants and/or algae.

  • An energy source composed primarily of methane and CO₂ that is produced by microorganisms when organic matter decomposes in the absence of oxygen.

  • Carbon stored in biological matter, including soil, plants, fungi, and plant products (e.g., wood, paper, biofuels). This carbon is sequestered from the atmosphere but can be released through decomposition or burning.

  • Living or dead renewable matter from plants or animals, not including organic material transformed into fossil fuels. Peat, in early decay stages, is partially renewable biomass.

  • Biogas refined to the same quality as natural gas. CO₂ and impurities are removed, and the biomethane can be distributed and used in existing natural gas technologies.
     

  • A type of carbon sequestration that captures carbon from CO₂ via photosynthesis and stores it in soils, sediments, and biomass, distinct from sequestration through chemical or industrial pathways.

  • A synthetic organic compound used to make a type of hard, clear plastic for food and drink packaging and many consumer goods.

  • A climate pollutant, also called soot, produced from incomplete combustion of organic matter, either naturally (wildfires) or from human activities (biomass or fossil fuel burning).

  • A secure, decentralized way of digitally tracking transactions that could be used to improve the transparency and efficiency of carbon markets. 

  • Fixed income debt instruments focused on sustainable ocean projects. Blue bonds work in the same manner as traditional bonds and may be issued by corporations, financial institutions, and governments.

  • A global initiative launched by Germany and the IUCN in 2011 to restore 150 Mha of land by 2020 and 350 Mha by 2030.

  • High-latitude (>50°N or >50°S) climate regions characterized by short growing seasons and cold temperatures.

  • Balance-of-system

  • bisphenol A

  • Revenue from carbon credits reserved for payout to land- and rights-holders in the event of a disturbance such as a fire; similar to insurance scheme.

  • The components of a building that physically separate the indoors from the outdoor environment.

  • The physical structure that separates a building’s external and internal environments. 

  • Businesses involved in the sale and/or distribution of solution-related equipment and technology, and businesses that want to support adoption of the solution.

  • Compound annual growth rate

  • A chemical reaction involving heating a solid to a high temperature; to make cement clinker, limestone is calcined into lime in a process that requires high heat and produces CO₂.

  • The ratio of the actual electricity an energy technology generates over a period of time to the maximum it could have produced if it operated continuously at full capacity.

  • A four-wheeled passenger vehicle.

  • Average number of people traveling in a car per trip.

  • Technologies that collect CO₂ before it enters the atmosphere, preventing emissions at their source. Collected CO₂ can be used onsite or in new products, or stored long term to prevent release.

  • A greenhouse gas that is naturally found in the atmosphere. Its atmospheric concentration has been increasing due to human activities, leading to warming and climate impacts.

  • Total GHG emissions resulting from a particular action, material, technology, or sector.

  • Amount of GHG emissions released per activity or unit of production. 

  • A marketplace where carbon credits are purchased and sold. One carbon credit represents activities that avoid, reduce, or remove one metric ton of GHG emissions.

  • A colorless, odorless gas released during the incomplete combustion of fuels containing carbon. Carbon monoxide can harm health and be fatal at high concentrations.

  • A credit representing claimed GHG reductions or removals that can be purchased to compensate for an organization’s or individual's own GHG emissions, enabling those emissions to continue.

  • The time it takes for the emissions reduction from a measure to equal the emissions invested in implementing the measure.

  • Activities or technologies that pull CO₂ out of the atmosphere, including enhancing natural carbon sinks and deploying engineered sinks.

  • Long-term storage of carbon in soils, sediment, biomass, oceans, and geologic formations after removal of CO₂ from the atmosphere or CO₂ capture from industrial and power generation processes.

  • The interconnected pool of dissolved inorganic carbon forms in water. Composed of dissolved CO₂, carbonic acid, bicarbonate ions, and carbonate ions.

  • The stocking rate a pasture can sustain without degrading forage supply or vegetation condition.

  • carbon capture and storage

  • carbon capture, utilization, and storage

  • Cooling degree days

  • A binding ingredient in concrete responsible for most of concrete’s life-cycle emissions. Cement is made primarily of clinker mixed with other mineral components.

  • chlorofluorocarbon

  • Processes that use chemical reactions or heat to break down plastic waste into basic molecular components or feedstocks that can then be used to make new plastic products.

  • Process that uses chemical reactions or heat to break down plastic waste into basic molecular components that can be used to make new plastic products.

  • methane

  • A system in which resources, materials, and products are used for as long as possible through reuse, repair, refurbishment, and recycling.

  • Energy sources that have little to no negative environmental or climate impacts during operation relative to fossil fuel–based energy sources.

  • A factor that warms or cools the planet.

  • Gases or particles that have a planet-warming effect when released to the atmosphere. Some climate pollutants also cause other forms of environmental damage.

  • Areas that have natural buffers from local climate change impacts, offering safe havens for species and ecosystems.

  • A binding ingredient in cement responsible for most of the life-cycle emissions from cement and concrete production.

  • A waste management process where waste is made into the same original product, preserving quality and value so materials can be reused multiple times while keeping resources in continuous use.

  • A system that encompasses both forward supply chains (from producer to consumer) and reverse logistics for reuse, recycling, or proper disposal.

  • Coal mine methane

  • Neighbors, volunteer organizations, hobbyists and interest groups, online communities, early adopters, individuals sharing a home, and private citizens seeking to support the solution.

  • A solution that potentially lowers the benefit of another solution through reduced effectiveness, higher costs, reduced or delayed adoption, or diminished global climate impact.

  • The average annual rate at which a value grows over a specified period, assuming profits are reinvested and growth occurs steadily each year.

  • Funding with substantially more generous terms than market loans (typically due to lower interest rates, longer repayment periods, or partial grants) used to support projects with public or development benefits.

  • A farming system that combines reduced tillage, cover crops, and crop rotations.

  • The proportion of water used or applied that is evaporated, transpired, or incorporated into a product and therefore is not returned to the local hydrological system through runoff or leaching.

  • Risk-sharing financial agreements in which two parties (e.g., renewable generator, government) guarantee a fixed price (e.g., electricity price). If market prices fluctuate, one party pays the other the difference.

  • Persistent long, thin clouds that form behind aircraft when water vapor in the exhaust condenses, then freezes into ice crystals at high altitudes. 

  • A measure of the total space cooling demand to maintain an indoor temperature below 24 °C

  • carbon dioxide

  • A  measure standardizing the warming effects of greenhouse gases relative to CO₂. CO₂-eq is calculated as quantity (metric tons) of a particular gas multiplied by its GWP.

  • carbon dioxide equivalent

  • Plant materials left over after a harvest, such as stalks, leaves, and seed husks.

  • A granular material made by crushing broken or waste glass.

  • direct air capture

  • Financial agreements in which government creditors forgive a portion of debt in exchange for specific conservation commitments.

  • The process of cutting greenhouse gas emissions (primarily CO₂) from a particular sector or activity.

  • An industrial process that removes printing ink from used or waste paper fibers, creating clean pulp that can be turned into new paper products.

  • A solution that works slower than gradual solutions and is expected to take longer to reach its full potential.

  • Microbial conversion of nitrate into inert nitrogen gas under low-oxygen conditions, which produces the greenhouse gas nitrous oxide as an intermediate compound.

  • Electronic document that verifies whether a product has been manufactured according to environmental and social standards and/or material origins, environmental impact, and disposal recommendations.

  • Electronic documents that verify whether or not a product has been manufactured according to environmental and social standards and/or material origins, environmental impact, and disposal recommendations.

  • Greenhouse gas emissions produced as a direct result of the use of a technology or practice.

  • Electric power that can be increased, decreased, or turned on/off to match real-time fluctuations in grid conditions. Typically supplied by fast-responding plants such as natural gas, hydroelectric, or battery storage.

  • The inorganic forms of carbon dissolved in seawater. Composed of dissolved CO₂, carbonic acid, bicarbonate ions, and carbonate ions.

  • A process for separating mixtures and purifying chemicals. Distillation can separate blends into components and remove impurities so the chemical can be reused, e.g., as a refrigerant reclamation step.

  • A system of underground distribution pipes that supply heat from centralized sources to a large number of buildings for space and water heating or industrial use.

  • A window consisting of two glass panes separated by a sealed gap and typically filled with air or an inert gas to improve the heat flow resistance.

  • A waste management system that transforms waste into different products of lower quality and value, making materials harder to recycle again and limiting reuse.

  • A measure of how long removed carbon stays out of the atmosphere.

  • Flexible benchmarks derived from independent, publicly available, frequently updated data sets.

  • European Energy Agency

  • Ability of a solution to reduce emissions or remove carbon, expressed in CO₂-eq per installed adoption unit. Effectiveness is quantified per year when the adoption unit is cumulative over time.

  • Enhanced geothermal system

  • Exajoule (one quintillion joules)

  • A process that uses electric current to drive a reaction, such as using electricity to split water molecules into hydrogen and oxygen.

  • Produced by electrolysis.

  • Greenhouse gas emissions accrued over the lifetime of a material or product, including as it is produced, transported, used, and disposed of.

  • Solutions that work faster than gradual solutions, front-loading their impact in the near term.

  • Methane produced by microbes in the digestive tracts of ruminant livestock, such as cattle, sheep and goats.

  • The unintended capture of organisms in intake flows.

  • Environmental Protection Agency

  • Extended Producer Responsibility

  • expanded polystyrene

  • Environmental Research & Education Foundation

  • environmental, social, and governance

  • exchange-traded fund

  • A process triggered by an overabundance of nutrients in water, particularly nitrogen and phosphorus, that stimulates excessive plant and algae growth and can harm aquatic organisms.

  • Electric vehicle

  • The movement of water from the earth’s surface to the atmosphere directly from land or water surfaces (evaporation) and through plant tissues (transpiration).

     

  • The scientific literature that supports our assessment of a solution's effectiveness.

  • A policy framework that assigns responsibility to producers for the end-of-life servicing of their products.

  • A group of human-made molecules that contain fluorine atoms. They are potent greenhouse gases with GWPs that can be hundreds to thousands times higher than CO₂.

  • Food, agriculture, land, and ocean

  • Food and Agriculture Organization of the United Nations

  • feed conversion ratio

  • The efficiency with which an animal converts feed into increased body mass, measured as the ratio of the weight of the feed given to weight gain. Lower FCR means less feed for the same growth.

  • A policy mechanism that incentivizes renewables through contracts that guarantee a set price for the electricity generated.

  • Raw material inputs for manufacturing, processing, and managing waste.

  • Containing or consisting of iron.

  • A measure of fishing activity over time and area, commonly measured by number of trips, vessel time, or gear deployed.

  • A solar PV system with panels mounted at a constant angle.

  • Glass is manufactured by floating molten glass on a molten tin bath, producing a smooth, flat product with high optical clarity, often used for window applications.

  • food loss and waste

  • Food discarded during pre-consumer supply chain stages, including production, harvest, and processing.

  • Food discarded during pre-consumer supply chain stages, including production, harvest, and processing, along with food discarded wt the retail and consumer stages of the supply chain.

  • Food discarded at the retail and consumer stages of the supply chain.

  • Combustible materials found in Earth's crust that can be burned for energy, including oil, natural gas, and coal. They are formed from decayed organisms through prehistoric geological processes.

  • Free, prior, and informed consent

  • A principled process of working with Indigenous communities that requires consent from Indigenous peoples for any decision, action, or activity that impacts their community and/or lands.

  • Unintentional leaks of gases or vapor into the atmosphere.

  • A group of countries representing the majority of the world's population, trade, and GDP. There are 19 member countries plus the European Union and the African Union

  • Gas collection and control system

  • A design or approach to policy, programs, or activities that addresses the different situations, roles, needs, and interests of women, men, girls, and boys.

  • Manipulating the environment to influence the quantities or impact of climate pollutants in the atmosphere.

  • Heavy-duty, low-permeability liners made mostly from synthetic plastics or rubber, used to block the movement of liquids or gases in engineered storage sites.

  • greenhouse gas

  • Global horizontal irradiance

  • gigajoule or billion joules

  • The glass layers or panes in a window.

  • The intensity of all solar radiant energy on a horizontal surface over a specific time frame, which limits PV power output. Measured as energy per area per year (kWh/m2/yr).

  • A measure of how effectively a gas traps heat in the atmosphere relative to CO₂. GWP converts greenhouse gases into CO₂-eq emissions based on their 20- or 100-year impacts.

  • A solution that has a steady impact on the atmosphere. Effectiveness is expected to be constant over time rather than having a higher impact in the near or long term.

  • A system that uses the slope of a field and furrows, borders, or flooding to apply water without pumping.

  • Hydrogen produced from natural gas, most commonly by combining heated steam with methane. Producing grey hydrogen emits CO₂ and leaks methane. Most hydrogen made today is grey.

  • A fixed income debt instrument focused on sustainable projects. Green bonds work in the same manner as traditional bonds and may be issued by corporations, financial institutions, and governments.

  • A fixed income debt instrument focused on sustainable projects. They work in the same manner as traditional bonds and may be issued by corporations, financial institutions, and governments.

  • Hydrogen gas made through electrolysis using electricity produced onsite using renewable energy sources.

  • The practice of charging more for renewable energy than for conventional energy to cover added costs .

  • Roofs that are designed to be partially or completely covered in vegetation.

  • Biomass discarded during landscaping and gardening.

  • A gas that traps heat in the atmosphere, contributing to climate change.

  • The makeup of electricity generation on a power grid, showing the share contributed by various energy sources (e.g., coal, natural gas, nuclear, wind, solar, hydro) relative to total electricity production.

  • A process by which GHGs dissolved in groundwater are released to the atmosphere when the groundwater is extracted from the aquifer.

  • metric gigatons or billion metric tons

  • global warming potential

  • A low-carbon steel-making technology that uses hydrogen from water, direct reduction of iron, and electric arc furnaces. 

  • hectare

  • household air pollution

  • A sector or process that is exceptionally challenging to decarbonize, often because of a lack of mature technology options.  

  • hydrochlorofluorocarbon

  • Number of years a person is expected to live without disability or other limitations that restrict basic functioning and activity.

  • A measure of the total space heating demand to maintain an indoor temperature above 18 °C

  • A unit of land area comprising 10,000 square meters, roughly equal to 2.5 acres.

  • Hybrid electric car

  • hydrofluorocarbon

  • hydrofluoroolefin

  • hydrofluoroolefin

  • high-income countries

  • Metal waste that is produced at a mill or foundry during the metal production process and recycled internally.

  • Particles and gases released from use of polluting fuels and technologies such as biomass cookstoves that cause poor air quality in and around the home.

  • heating, ventilation, air conditioning, and refrigeration

  • Organic compounds that contain hydrogen and carbon.

  • Human-made F-gases that contain hydrogen, fluorine, and carbon. They typically have short atmospheric lifetimes and GWPs hundreds or thousands times higher than CO₂. 

  • Human-made F-gases that contain hydrogen, fluorine, and carbon, with at least one double bond. They have low GWPs and can be climate-friendly alternatives to HFC refrigerants.

  • A recycling process that separates fibers from contaminants for reuse. Paper or cardboard is mixed with water to break down fibrous materials into pulp.

  • internal combustion engine

  • International Energy Agency

  • Aerobic decomposition of organic waste in a sealed container or bin/bay system. 

  • Greenhouse gas emissions produced as a result of a technology or practice but not directly from its use.

  • Land use change that supply or demand of agricultural products in one location induce in another location.

  • A solid block of purified silicon formed by melting and crystallizing raw silicon; it serves as the base material for slicing into wafers used in solar cells.

  • Device used to power vehicles by the intake, compression, combustion, and exhaust of fuel that drives moving parts.

  • The annual discount rate that balances net cash flows for a project over time. Also called IRR, internal rate of return is used to estimate profitability of potential investments.

  • Individuals or institutions willing to lend money in search of a return on their investment.

  • Intergovernmental Panel on Climate Change

  • Indigenous peoples’ land

  • Integrated pest management.

  • internal rate of return

  • The timing and amount of irrigation water applied.

  • International Union for Conservation of Nature

  • The most comprehensive global list of species threatened with extinction, maintained by the International Union for Conservation of Nature.

  • International agreement adopted in 2016 to phase down the use of high-GWP HFC F-gases over the time frame 2019–2047.

  • A measure of energy equivalent to the energy delivered by 1,000 watts of power over one hour.

  • kiloton or one thousand metric tons

  • kilowatt-hour

  • The intentional or unintentional act of property use crossing ownership boundaries without permission.

  • A measure of land use efficiency that compares combined system productivity to single-use alternatives. A land equivalent ratio above 1.0 indicates dual-use systems have higher output than separate implementation.

  • A land-holding system, e.g. ownership, leasing, or renting. Secure land tenure means farmers or other land users will maintain access to and use of the land in future years.

  • Gases, mainly methane and CO₂, created by the decomposition of organic matter in the absence of oxygen.

  • levelized cost of electricity

  • leak detection and repair

  • Regular monitoring for fugitive methane leaks throughout oil and gas, coal, and landfill sector infrastructure and the modification or replacement of leaking equipment.

  • Relocation of economic markets, environmental impacts, or emissions-causing activities from one area to another as a result of a mitigation action, reducing or offsetting the intended benefit.

  • The rate at which solution costs decrease as adoption increases, based on production efficiencies, technological improvements, or other factors.

  • Percent decrease in costs per doubling of adoption.

  • A metric describing the expected break-even cost of generating electricity per megawatt-hour ($/MWh), combining costs related to capital, operation, and fuel (if used) and dividing by total output over the generator's lifetime.

  • landfill gas

  • Greenhouse gas emissions from the sourcing, production, use, and disposal of a technology or practice.

  • A process that converts biomass, plastics, or other solid wastes into liquid fuel or chemicals.

  • The total weight of an organism before any meat processing.

  • low- and middle-income countries

  • liquefied petroleum gas

  • land use change

  • A measure of the amount of light produced by a light source per energy input.

  • live weight

  • marginal abatement cost curve

  • Livestock grazing practices that strategically manage livestock density, grazing intensity, and timing. Also called improved grazing, these practices have environmental, soil health, and climate benefits, including enhanced soil carbon sequestration.

  • Intertidal coastal wetlands with salt-tolerant trees and shrubs found in tropical and subtropical regions.

  • A tool to measure and compare the financial cost and abatement benefit of individual actions based on the initial and operating costs, revenue, and emission reduction potential.

  • Periods of unusually warm ocean temperatures that typically last from days to months and can affect large areas of the ocean.

  • Defined by the International Union for Conservation of Nature as: "A clearly defined geographical space, recognised, dedicated and managed, through legal or other effective means, to achieve the long-term conservation of nature with associated ecosystem services and cultural values." References to PAs here also include other effective area-based conservation measures defined by the IUCN. 

  • A facility that receives recyclable waste from residential, commercial, and industrial sources; separates, processes, and prepares them; and then sells them to manufacturers for reuse in new products.

  • A measure of energy equivalent to the energy delivered by one million watts of power over one hour.

  • A greenhouse gas with a short lifetime and high GWP that can be produced through a variety of mechanisms including the breakdown of organic matter.

  • A measure of mass equivalent to 1,000 kilograms (~2,200 lb), also known as tonne.

  • million hectares

  • The natural process by which microbes convert matter to energy, often producing CO₂ or other GHGs as a byproduct.

  • Soils mostly composed of inorganic materials formed through the breakdown of rocks. Most soils are mineral soils, and they generally have less than 20% organic matter by weight.

  • A localized electricity system that independently generates and distributes power. Typically serving limited geographic areas, mini-grids can operate in isolation or interconnected with the main grid.

  • Reduce adverse impact of

  • A reduction in adverse impact

  • megajoule or one million joules

  • Digital platform that integrates transport modes such as public transit, carpooling, and bike sharing into a single service, allowing users to plan, book, and pay for multimodal trips through one application.

  • Percent of trips made by different passenger and freight transportation modes.

  • A condition of being diseased, unhealthy, or injured.

  • Marine Protected Area

  • materials recovery facility

  • monitoring, reporting, and verification

  • Municipal solid waste

  • megaton or million metric tons

  • Materials discarded from residential and commercial sectors, including organic waste, glass, metals, plastics, paper, and cardboard.

  • megawatt

  • Megawatt-hour

  • micro wind turbine

  • square meter kelvins per watt (a measure of thermal resistance, also called R-value)

  • nitrous oxide

  • The enclosed housing at the top of a wind turbine tower that contains the main mechanical and electrical components of the turbine.

  • A commitment from a country to reduce national emissions and/or sequester carbon in alignment with global climate goals under the Paris Agreement, including plans for adapting to climate impacts.

  • A gaseous form of hydrocarbons consisting mainly of methane.

  • Chemicals found in nature that are used for cooling and heating, such as CO₂, ammonia, and some hydrocarbons. They have low GWPs and are ozone friendly, making them climate-friendly refrigerants.

  • The rate of primary production for photosynthetic organisms, excluding the carbon they respire for their own metabolic processes.

  • The rate at which photosynthetic organisms convert carbon dioxide into organic matter, minus the carbon they respire for their own metabolic processes.

  • Microbial conversion of ammonia or ammonium to nitrite and then to nitrate under aerobic conditions.

  • A group of air pollutant molecules composed of nitrogen and oxygen, including NO and NO₂.

  • A greenhouse gas produced during fossil fuel combustion and agricultural and industrial processes. N₂O is hundreds of times more potent than CO₂ at trapping atmospheric heat, and it depletes stratospheric ozone.

  • Metals or alloys that do not contain significant amounts of iron.

  • Social welfare organizations, civic leagues, social clubs, labor organizations, business associations, and other not-for-profit organizations.

  • A material or energy source that relies on resources that are finite or not naturally replenished at the rate of consumption, including fossil fuels like coal, oil, and natural gas.

  • nitrogen oxides

  • Net primary production

  • nitrous oxide

  • The process of increasing the acidity of seawater, primarily caused by absorption of CO₂ from the atmosphere.

  • Organisation for Economic Co-operation and Development

  • An agreement between a seller who will produce future goods and a purchaser who commits to buying them, often used as project financing for producers prior to manufacturing.

  • Waste made of plant or animal matter, including food waste and green waste.

  • Systems to connect buyers with a network of smallholder farmers to stabilize supply and demand (sometimes called "contract farming.”

  • organic waste

  • Protected area

  • Protected Area

  • A certification that verifies a metric ton of packaging waste has been recovered and is being exported for reprocessing.

  • A certification that verifies a metric ton of packaging waste has been recovered and reprocessed.

  • Productive use of wet or rewetted peatlands that does not disturb the peat layer, such as for hunting, gathering, and growing wetland-adapted crops for food, fiber, and energy.

  • A legally protected area that lacks effective enforcement or management, resulting in minimal to no conservation benefit.

  • Airborne particles composed of solids and liquids.

  • A measure of transporting one passenger over a distance of one kilometer.

  • Incentive payments to landowners or managers to conserve natural resources and promote healthy ecological functions or ecosystem services.

  • An organic, carbon-rich soil layer made of partially decomposed dead plant material that accumulates under low-oxygen conditions.

  • Small, hardened pieces of plastic made from cooled resin that can be melted to make new plastic products.

  • Transitional zone between urban and rural areas that combines features of both such as housing, farms, lower-density development, and mixed land uses.

  • The longevity of any greenhouse gas emission reductions or removals. Solution impacts are considered permanent if the risk of reversing the positive climate impacts is low within 100 years.

  • Packaging waste export recovery note

  • High-efficiency solar cells with a traditional silicon base and a thin-film perovskite layer on top that allows the combined cell to capture more energy without significantly increasing its size.

  • Advanced solar cells combining perovskite and silicon layers to capture more of the solar spectrum, achieving higher efficiency than conventional silicon cells.

  • Payments for ecosystem services

  • A mixture of hydrocarbons, small amounts of other organic compounds, and trace amounts of metals used to produce products such as fuels or plastics.

  • Per- and polyfluoroalkyl substances, a class of synthetic chemicals that do not degrade easily in the environment. They can pollute the environment and can have negative impacts on human health.

  • A measure of the acidity (pH<7) or alkalinity (pH>7) of a solution.

  • Reduce the use of a material or practice over time.

  • Eliminate the use of a material or practice over time.

  • Plug-in hybrid electric car

  • Private, national, or multilateral organizations dedicated to providing aid through in-kind or financial donations.

  • A chemical or material that initiates or accelerates a chemical reaction when exposed to light without being consumed.

  • An atmospheric reaction among sunlight, VOCs, and nitrogen oxide that leads to ground-level ozone formation. Ground-level ozone, a component of smog, harms human health and the environment.

  • The process by which certain materials, such as those in solar cells, convert sunlight into electricity by releasing electrons.

  • The process by which sunlight is converted into electricity. When light hits certain materials, such as those in solar panels, it mobilizes electrons, creating an electric current.

  • A family of synthetic organic compounds used to make plastics softer, more flexible, and durable. They are added to a wide range of plastics for consumer and industrial uses.

  • polyisocyanurate

  • The adjustment of turbine blade angles around their long axis in which a control system rotates blades slightly forward or backward to regulate wind capture and optimize electricity generation.

  • passenger kilometer

  • particulate matter

  • Particulate matter 2.5 micrometers or less in diameter that can harm human health when inhaled.

  • Elected officials and their staff, bureaucrats, civil servants, regulators, attorneys, and government affairs professionals.

  • System in a vehicle that generates power and delivers it to the wheels. It typically includes an engine and/or motor, transmission, driveshaft, and differential.

  • Purchase Power Agreement.

  • Purchase Power Agreements

  • Parts per million

  • People who most directly interface with a solution and/or determine whether the solution is used and/or available. 

  • A chemical reaction that creates a solid from a solution.

  • A substance that is the starting material for a chemical reaction that forms a different substance.

  • Extraction of naturally occurring resources from the Earth, including mining, logging, and oil and gas refining. These resources can be used in raw or minimally processed forms to produce materials.

  • The process of converting inorganic matter, including carbon dioxide, into organic matter (biomass), primarily by photosynthetic organisms such as plants and algae.

  • Packaging waste recovery note

  • Defined by the International Union for the Conservation of Nature as "A clearly defined geographical space, recognised, dedicated and managed, through legal or other effective means, to achieve the long-term conservation of nature with associated ecosystem services and cultural values". References to PAs here also include other effective area-based conservation measures defined by the IUCN. 

  • A process that separates and breaks down wood and other raw materials into fibers that form pulp, the base ingredient for making paper products.

  • polyurethane

  • Long-term contract between a company (the buyer) and a renewable energy producer (the seller).

  • Long-term contracts between a company (the buyer) and a renewable energy producer (the seller).

  • photovoltaic

  • Petawatt-hour, equal to 1 billion MWh

  • research and development

  • An atom, molecule, or ion that contains at least one unpaired valence electron, making it highly reactive and often short-lived.

  • A situation in which improvements in efficiency or savings lead to consumers increasing consumption, partially or fully offsetting or exceeding the emissions or cost benefits.

  • renewable energy certificate

  • Chemical or mixture used for cooling and heating in refrigeration, air conditioning, and heat pump equipment. Refrigerants absorb and release heat as they move between states under changing pressure.

  • The amount of refrigerant needed for a particular refrigeration, air conditioning, or heat pump system.

  • Adding refrigerant to equipment to reach its correct amount (called refrigerant charge). Charging is performed by a trained technician during manufacturing, installation, and maintenance after evacuating air and contaminants.

  • A group of approaches to farming and ranching that emphasizes enhancing the health of soil by restoring its carbon content and providing other benefits to the farm and surrounding ecosystem.

  • A solution that can increase the beneficial impact of another solution through increased effectiveness, lower costs, improved adoption, enhanced global climate impact, and/or other benefits to people and nature.

  • A material or energy source that relies on naturally occuring and replenishing resources such as plant matter, wind, or sunlight.

  • A market-based instrument that tracks ownership of renewable energy generation.

  • The moldable form of raw plastic material, created by melting down waste or virgin plastics and serving as the building block for creating new plastic goods.

  • The process of moving items from end users (e.g., consumers) back to the sellers, manufacturers, or salvagers for reuse, recycling, or disposal. This can include transportation, cleaning, sorting, and more.

  • The risk that removed or stored carbon can be released into the atmosphere. Lower reversibility means the carbon is more securely stored.


     

  • Hiring a vehicle to take a passenger or passengers to a particular destination.

  • U.N. treaties to combat climate change, biodiversity loss, and desertification. They include the U.N. Framework Convention on Climate Change (UNFCCC), the Convention on Biological Diversity (CBD), and the U.N. Convention to Combat Desertification (UNCCD).

  • A class of animals with complex stomachs that can digest grass. Most grazing livestock are ruminants including cows, sheep, and goats along with several other species.

  • sustainable aviation fuel

  • A wetland ecosystem regularly flooded by tides and containing salt-tolerant plants, such as grasses and herbs.

  • Intertidal coastal wetlands with salt-tolerant plants.

  • An ecosystem characterized by low-density tree cover that allows for a grass subcanopy.

  • Very large or small numbers are formatted in scientific notation. A positive exponent multiplies the number by powers of ten; a negative exponent divides the number by powers of ten.

  • Seasonal coefficient of performance

  • Sustainable Development Goals

  • Average units of heat energy released for every unit of electrical energy consumed, used to measure heat pump efficiency.

  • A single pane window (glass and frame) added to an existing single-glazed window, converting the unit into double glazing, with each pane independently operable.

  • A practice in which multiple utility companies own and operate high-voltage power lines, sharing both costs and benefits.

  • Greenhouse gases and other climate-impacting compounds with much shorter atmospheric lifetimes than CO₂. These include methane, certain F-gases, black carbon, and tropospheric ozone. Mitigating these emissions has a near-term impact.

  • A window consisting of one glass pane without any additional insulating layers.

  • Small-scale family farmers and other food producers, often with limited resources, usually in the tropics. The average size of a smallholder farm is two hectares (about five acres).

  • Devices that control indoor temperature according to user-defined schedules or conditions.

  • soil organic carbon

  • The process of using direct, real-world observations to verify, validate, and/or improve data and models about social systems, often using in-person observations in the field.

  • Carbon stored in soils, including both organic (from decomposing plants and microbes) and inorganic (from carbonate-containing minerals).

  • Carbon stored in soils in organic forms (from decomposing plants and microbes). Soil organic carbon makes up roughly half of soil organic matter by weight.

  • Biologically derived matter in soils, including living, dead, and decayed plant and microbial tissues. Soil organic matter is roughly half carbon on a dry-weight basis.

  • A measure of the intensity of solar radiant energy on a surface, measured in watts per square meter (W/m2) or power per unit area.

  • Reducing global warming by increasing how much of the sun's radiation is reflected back to space and/or decreasing how much of the Earth's radiative heat is trapped in the atmosphere. 

  • A material's ability to reflect solar radiation incident on its surface, often reported as a fraction or percentage.

  • soil organic matter

  • A substance that takes up another liquid or gas substance, either by absorbtion or adsorption.

  • sulfur oxides

  • sulfur dioxide

  • The rate at which a climate solution physically affects the atmosphere after being deployed. At Project Drawdown, we use three categories: emergency brake (fastest impact), gradual, or delayed (slowest impact).

  • Climate regions between latitudes 23.4° to 35° above and below the equator characterized by warm summers and mild winters.

  • A polluting gas produced primarily from burning fossil fuels and industrial processes that directly harms the environment and human health.

  • A group of gases containing sulfur and oxygen that predominantly come from burning fossil fuels. They contribute to air pollution, acid rain, and respiratory health issues.

  • Processes, people, and resources involved in producing and delivering a product from supplier to end customer, including material acquisition.

  • Sport utility vehicle

  • A mixture of hydrogen, carbon monoxide, and other gases, used to produce chemicals like ammonia and methanol, or as a synthetic fuel made from non-fossil feedstocks, including biomass and waste.

  • metric ton

  • metric tons

  • Technology developers, including founders, designers, inventors, R&D staff, and creators seeking to overcome technical or practical challenges.

  • Climate regions between 35° to 50° above and below the equator characterized by moderate mean annual temperatures and distinct seasons, with warm summers and cold winters.

  • A measure of energy equivalent to the energy delivered by one trillion watts of power over one hour.

  • trifluoroacetic acid

  • A measurement indicating the ability of a material to release heat after it has been absorbed.

  • A measure of how well a material prevents heat flow, often called R-value or RSI-value for insulation. A higher R-value means better thermal performance.

  • A measure of the rate of heat flow or heat transfer through a material or building component. A lower U-value means better thermal performance.

  • Individuals with an established audience for their work, including public figures, experts, journalists, and educators.

  • Charges for disposal of materials paid to facility operators. Fees can be charged per ton of waste disposed or based on economic indicators such as the Consumer Price Index.

  • A solar PV systems with panels that move automatically to follow the sun’s path, maximizing energy capture and improving efficiency over fixed systems.

  • A window consisting of three panes of glass separated by two insulating inert gas-filled layers, providing more heat flow resistance than single or double glazing.

  • Low-latitude (23.4°S to 23.4°N) climate regions near the Equator characterized by year-round high temperatures and distinct wet and dry seasons.

  • Terawatt, equal to 1,000 gigawatts

  • terawatt-hour

  • United Nations

  • United Nations Environment Programme

  • U.S. Composting Council

  • Ventilation air methane

  • Self-propelled machine for transporting passengers or freight on roads.

  • A measure of one vehicle traveling a distance of one kilometer.

  • How easily and reliably a carbon‑removal claim can be measured and independently confirmed as accurate; part of measurement, reporting and verification (MRV) for carbon removal.

  • Aerobic decomposition of organic waste by earthworms and microorganisms.

  • vehicle kilometer

  • volatile organic compound

  • Gases made of organic, carbon-based molecules that are readily released into the air from other solid or liquid materials. Some VOCs are greenhouse gases or can harm human health.

  • watt (a measure of power or energy transfer.)

  • Watts per square meter Kelvin

  • A thin, flat slice of silicon cut from an ingot and processed to create individual solar cells that convert sunlight into electricity.

  • Landscape waste, storm debris, wood processing residues, and recovered post-consumer wood.

  • A framework for waste management that ranks options by their sustainability: 1) prevent (do not purchase unnecessary waste), 2) reduce, 3) reuse, 4) recycle, 5) recover, 6) dispose.

  • A measure of how much free water is available for microbes to use. It ranges from 0 (completely dry) to 1 (pure water), and low values (<0.60) indicate conditions too dry for microbes to function.

  • A measure of power equal to one joule per second.

  • World Conservation Monitoring Centre

  • Using strategies such as insulation, air sealing, ventilation, and moisture control to upgrade a building’s exterior structure, making indoors more comfortable and energy efficient.

  • Aerobic decomposition of organic waste in long, narrow rows called windrows. Windrows are generally twice as long as they are wide.

  • A subset of forest ecosystems that may have sparser canopy cover,  smaller-stature trees, and/or trees characterized by basal branching rather than a single main stem.

  • extruded polystyrene

  • The rotation of the nacelle (the enclosed housing at the top of a wind turbine tower that contains the main mechanical and electrical components of the turbine) so that the rotor blades are always facing directly into the wind.

  • year-over-year

  • year