Cut Emissions Buildings & Industry Cut Fugitive Emissions

Improve Refrigerant Management

Highly Recommended
Image
Refrigerant controls

Improving refrigerant management involves deploying practices and technologies that reduce the amount of climate-warming refrigerant chemicals escaping into the atmosphere from air conditioning, refrigeration, and heat pump equipment. This solution has two components: reducing refrigerant leaks during refrigerant charging and use, and recovering refrigerant to prevent its release from end-of-life equipment. These activities reduce direct emissions of fluorinated gas (F-gas) refrigerants, many of which have high global warming potentials (GWPs) and contribute strongly to near-term climate warming.

Last updated November 16, 2026

Solution Basics

kt refrigerant release avoided

t CO₂-eq (100-yr)/unit
2.6×10⁶
units/yr
Current Not Determined 0100200
Achievable (Low to High)

Climate Impact

Gt CO₂-eq (100-yr)/yr
Current Not Determined 0.30.5
US$ per t CO₂-eq
20
Emergency Brake

F-gases

Solution Basics

kt refrigerant release avoided

t CO₂-eq (100-yr)/unit
2.6×10⁶
units/yr
Current 29 0130200
Achievable (Low to High)

Climate Impact

Gt CO₂-eq (100-yr)/yr
Current 0.1 0.340.52
Emergency Brake

F-gases

Additional Benefits

183,187
    183
  • 184
  • 185
  • 186
  • 187
  • 188
191,194

Overview

Refrigerants are chemicals that can absorb and release heat as they move between gaseous and liquid states under changing pressure. They are used in equipment such as refrigerators, air conditioners, and heat pumps. Most refrigerants in modern equipment are F-gases with high GWPs, meaning that they trap hundreds to thousands times more heat in the atmosphere than CO₂. Since many refrigerants are short-lived climate pollutants, any potent warming impacts are concentrated in the near term; therefore, preventing refrigerant release is an “emergency brake” climate solution.

The Montreal Protocol has mostly phased out production and consumption of high-GWP F-gas refrigerants that harm the ozone layer, including chlorofluorocarbons (CFCs) and hydrochlorofluorocarbons (HCFCs) (Montreal Protocol on Substances That Deplete the Ozone Layer, 1987). However, large quantities remain stored in existing equipment (Lickley et al., 2022). 

The subsequent generation of refrigerants, hydrofluorocarbons (HFCs), do not harm the ozone layer but are powerful GHGs. The Kigali Amendment to the Montreal Protocol is beginning to phase these out as well (Amendment to the Montreal Protocol on Substances That Deplete the Ozone Layer, 2016).

Global warming from refrigerant use can be reduced by:

  • using refrigerants with lower GWPs 
  • reducing leaks during equipment manufacturing, transport, installation, use, and maintenance
  • preventing release at equipment end-of-life by recovering refrigerant and destroying or reusing it
  • using less refrigerant through efficiency improvements, smaller refrigerant charge sizes, or reduction in demand.

The use of lower-GWP refrigerant chemicals, including both medium- and ultra-low-GWP replacements, is covered in Deploy Alternative Refrigerants. Improve Refrigerant Management includes leak reduction and responsible end-of-life management of CFC, HCFC, and HFC refrigerants (Figure 1):

  • leak reduction during equipment use and refrigerant charging, including equipment design improvements, leak testing, leak detection, and installation and maintenance improvements 
  • end-of-life management of used refrigerant, including training on proper recovery, improved access to specialized recovery and destruction equipment, reverse supply chain infrastructure, and testing to identify refrigerant composition. 

Figure 1. Life-cycle pathways that refrigerant can take when used in refrigeration, air conditioning, and heat pump equipment. Effective management helps keep refrigerant from entering the atmosphere during install and use-and-maintenance (leak reduction) and end-of-life stages. Modified from Benedetti, 2023.

Image
Diagram

Source: Benedetti, C. (2023, November). Lifecycle refrigerant management actions. Yale Carbon Containment Lab.

Responsible end-of-life management includes two practices (Peixoto & Dhont, 2024):

  1. Recovery and reuse: collection and storage of refrigerants (recovery) followed by either recycling or reclaiming refrigerant for reuse in equipment. Recycling usually involves immediate reuse after filtering and drying and can also be done during equipment servicing. If the refrigerant is treated, purified, and filtered more extensively, this is called reclamation. 
  2. Recovery and destruction: collection and storage of refrigerants followed by permanently chemically transforming or decomposing them (Vehlow & Gloël, 2020). 

The preferred end-of-life pathway will depend on the type of refrigerant and equipment, as well as the regional market and policy conditions. For example, if a country is still producing HFCs, recovery and reuse may be prioritized to reduce virgin HFC production.

Since high-GWP refrigerant chemicals exist in large quantities today and phase-out will take decades, reducing GHG emissions from stockpiles now through refrigerant management will have an immediate and large benefit to the climate. The role of refrigerant management in reducing these emissions will decrease as lower-GWP alternative refrigerants become more prevalent in active and disposed equipment, but the near-term climate benefits make refrigerant management a critical action.

Impact Calculator

Adjust effectiveness and adoption using range sliders to see resulting climate impact potential.

Effectiveness

2.6×10⁶
t CO2-eq/kt refrigerant release avoided

Adoption

0
kt refrigerant release avoided/yr
Low
100
High
200
0
Achievable Range

Climate Impact

0.00
Gt CO₂-eq/yr (100-yr)
05
which is the equivalent of
0.00%
of global emissions
Adjust effectiveness and adoption using range sliders to see resulting climate impact potential.

Effectiveness

2.6×10⁶
t CO2-eq/unit

Adoption

29
kt refrigerant release avoided/yr
Low
130
High
200
29
current
Achievable Range

Climate Impact

0.08
Gt CO₂-eq/yr (100-yr)
05
which is the equivalent of
0.13%
of global emissions

Maps

Improved refrigerant management is most impactful in areas where refrigerant emissions are highest, such as countries with high refrigerant use and low current adoption. Regions with the highest-GWP refrigerant stocks will prevent more warming per kiloton of refrigerant release avoided, and stocks with ozone-depleting CFCs or HCFCs should be prioritized to avoid damage to the ozone layer. Warmer regions with greater cooling demand are likely to require more refrigerant use, and therefore have greater emissions if not managed. Regional patterns of where this solution is most important may evolve as refrigeration, air conditioning, and heat pump appliances become more widespread and the climate warms. 

Country-level emissions data are limited. The Ozone Secretariat (n.d.) tracks CFC, HCFC, and HFC production and consumption, but current emissions are hard to estimate because these data do not include breakdowns by chemical or existing stock quantities. The Environmental Investigation Agency (2025a) points out that the lack of transparency in Ozone Secretariat data impedes understanding of how these chemicals are being produced and used. 

Areas with higher leak rates from equipment would benefit most from leak reduction practices. However, leak rate data are limited and typically only for select countries or equipment, making it challenging to create a map of fugitive refrigerant emissions. 

CLASP (2026) reports that in 2025, China had the greatest number of residential air conditioner and refrigerator-freezer units. Others with high numbers of in-use appliances are the United States, India, and the European Union. This suggests that residential refrigerant use and emissions are likely to be high in these countries, with high potential to adopt refrigerant management. 

Developing economies and small island states have infrastructural challenges to adoption, including lack of reclamation and destruction facilities and lack of reverse supply chains (Maranion et al., 2026). Funding has been deployed to support equipment and training in these countries and could narrow the adoption gap (Environmental Investigation Agency, 2025b).

Note: Detailed global maps for this solution are currently under development.

The Details

Current State

Both leak reduction and end-of-life management could reduce emissions by 2.6 Mt CO₂‑eq (100-yr) for each kt refrigerant release avoided (Table 1a,b). Since many HFC and HCFC refrigerants have short lifetimes in the atmosphere, the 20-year effectiveness of these solutions is higher: Both prevent 5.9 Mt CO₂‑eq (20-yr)/kt refrigerant release avoided.

Table 1. Effectiveness at reducing emissions.

Unit: t CO₂‑eq /kt refrigerant release avoided, 100-yr basis

Leak reduction 2,600,000

Unit: t CO₂‑eq /kt refrigerant release avoided, 100-yr basis

End-of-life management 2,600,000

Leak reduction mitigates direct F-gas leaks as well as CO₂ and F-gas manufacturing emissions due to reduced demand for virgin refrigerant (see Appendix A). Running equipment at a closer-to-full refrigerant charge saves energy, but we did not include reduced energy-related emissions in this assessment. 

End-of-life management prevents refrigerant emissions, but its effectiveness is slightly reduced by emitted GHGs from processing, including emissions from recovering and destroying or recovering and reclaiming used refrigerant. These processing emissions are mostly CO₂. We calculated overall end-of-life effectiveness as an average of these two practices, assuming that equal amounts of recovery and destruction and recovery and reclamation occur (Appendix A).

The refrigerants considered in these calculations are common CFCs, HCFCs, and HFCs as reported by the United Nations Environment Programme (UNEP) Medical and Chemical Technical Options Committee (Ohnishi et al., 2022). Effectiveness values across all practices are similar because GHG emissions saved from preventing 1 kt direct F-gas refrigerant release are much higher than any process emissions generated from manufacturing, recovering, destroying, or reclaiming 1 kt refrigerant. 

We estimated that leak reduction can cost US$20/t CO₂‑eq emissions avoided (100-yr basis) (Table 2a) or US$8/t CO₂‑eq (20-year basis). 

Table 2. Cost per unit climate impact.

Unit: 2023 US$/t CO₂‑eq , 100-yr basis

Leak reduction 20

Unit: 2023 US$/t CO₂‑eq , 100-yr basis

End-of-life management Not determined

The Intergovernmental Panel on Climate Change (IPCC) Sixth Assessment Report found that most emissions of F-gases can be reduced for under US$20/t CO₂‑eq (Babiker et al., 2023). Other experts have predicted significant possible emissions reductions if Montreal Protocol parties allocate an additional US$0.10/t CO₂‑eq for refrigerant management (Dreyfus et al., 2023). For larger equipment with high leak rates, such as retail food refrigeration, leak reduction could even have net cost savings (U.S. Environmental Protection Agency [U.S. EPA], 2019). 

Costs of leak reduction, refrigerant reclamation, and refrigerant recycling are greatly influenced by the price of virgin refrigerant, with higher prices increasing the financial benefit of these practices. Although we estimated a refrigerant price of ~US$30/kg, Öko-Recherche (2025) reported that in 2025, EU prices of select refrigerants could range from ~€5–55/kg (~US$6–65/kg). If refrigerant costs are high (US$65/kg), this would lower our estimated cost of leak reduction practices from US$20/t CO₂‑eq to US$10/t CO₂‑eq (100-yr basis). Low refrigerant costs (US$6/kg) would have the opposite impact, increasing leak reduction costs to US$30/t CO₂‑eq. Since refrigerant prices can vary over time, this unpredictability is a barrier to deploying capital investments (Peixoto & Dhont, 2024).

Another factor we did not evaluate is that running equipment at a closer-to-full refrigerant charge leads to a longer lifetime and more efficient operation (Eunomia Research & Consulting Ltd & Centre for Air Conditioning and Refrigeration Research, 2014; Peixoto & Dhont, 2024). This would reduce both initial and electricity costs. Electricity costs are a large part of the life-cycle costs for refrigerators, air conditioners, and heat pumps, so these savings can be significant (Goetzler et al., 2016). 

End-of-life management costs are challenging to quantify, so we do not report a cost per climate impact (Table 2b). For destruction, since facilities can operate for many years and process high volumes of refrigerant, operating costs are the main expenses once initial costs are amortized. For regions without local destruction infrastructure and low quantities of material to dispose of, exporting waste refrigerant may be less expensive than local destruction (Heubes et al., 2017). Recycling or reclamation has the financial benefit over destruction of having revenue from the sale (or savings from the reuse) of used refrigerant.

The values we discuss here for all types of refrigerant management are estimates based on limited available data, primarily from developed countries. More comprehensive global information is needed for a clear understanding of the costs of these practices. 

We did not quantify a learning curve for Improve Refrigerant Management due to the wide range of equipment and practices covered by this solution and lack of global data. We would not expect a significant learning rate due to high technology readiness for both leak reduction and end-of-life management equipment.

Costs of refrigerant management vary based on refrigerant prices, technology availability, regulations, and carbon markets. Refrigerant destruction, in particular, has few financial incentives and is likely to be driven by carbon financing or policy (U.S.EPA, 2021). The refrigerant transition and HFC phasedown could lead to cost incentives for reclaiming or recycling short-supply HFCs, but costs could increase for alternative blended refrigerants with new required recovery or processing technologies (Peixoto & Dhont, 2024; U.S. EPA, 2024). Training for installation, maintenance, and recovery professionals might reduce the time and cost of labor.

Speed of action refers to how quickly a climate solution physically affects the atmosphere after it is deployed. This is different from speed of deployment, which is the pace at which solutions are adopted.

At Project Drawdown, we define the speed of action for each climate solution as emergency brake, gradual, or delayed.

Improve Refrigerant Management is an EMERGENCY BRAKE climate solution. It has the potential to deliver a more rapid impact than gradual and delayed solutions. Because emergency brake solutions can deliver their climate benefits quickly, they can help accelerate our efforts to address dangerous levels of climate change. For this reason, they are a high priority.

Adoption

We don’t report a current value for leak reduction adoption, since leak rate data reflect the current state of emissions and not reductions in leaked quantities (Table 3a). 

Estimating leak rates across countries, equipment types, charge sizes, and refrigerant types is challenging. We aggregated expert estimates of leak rates for different refrigerant applications; our findings ranged from <1% annually from residential refrigeration to 20% annually leaking from transport refrigeration systems. We estimated the average annual leak rate of all in-use refrigerants to be 9%. See Appendix B for sources and details of this calculation. This is likely an underestimate, especially for leakier commercial and industrial refrigeration systems. 

We estimated that end-of-life management avoids the release of 29 kt/yr of CFCs, HCFCs, and HFCs (Table 3b). We identified 15 kt/yr of refrigerants that are destroyed, 12 kt/yr recycled or reclaimed, and 2.4 kt/yr recovered with unspecified management. These estimates include data from Australia, Japan, the United States, China, Canada, and the European Union. Although this is not comprehensive, these countries are responsible for at least 65% of recent destruction of controlled substances, and in some years greater than 90% (Ozone Secretariat, 2026; Ohnishi et al., 2022). However, some non-refrigerant chemicals are included in the data. Data gaps make this estimate challenging; we expect it to be an underestimate of end-of-life management globally.

Table 3. Current adoption.

Unit: kt refrigerant release avoided/yr

Leak reduction Not determined

Unit: kt refrigerant release avoided/yr

Recovery 2.4
Recycling or reclamation 12
Destruction 15
All end-of-life management 29

Sources agreed that current adoption of end-of-life management is poor. UNEP estimated that even countries with robust and long-standing refrigerant recovery programs – such as Japan and Australia – recover only ~40% of refrigerant in end-of-life equipment (Peixoto & Dhont, 2024). Although we estimated that globally 29 kt/yr are managed at end-of-life, gross production of HFCs in 2024 in the United States alone was more than 120 kt (U.S. EPA, 2025a).

Comprehensive global data on trends in leak reduction or end-of-life management are lacking. However, some countries with relatively high levels of management and reporting have country-specific information on end-of-life management. 

In Japan, the amount of CFCs, HCFCs, and HFCs managed from 2015–2023 increased by approximately 10%, mostly driven by an increase in refrigerant recycling and HFC management (Japan Ministry of the Environment, 2025). Destruction in Japan has decreased from 2015 levels. Japan’s progress can be connected to several refrigerant management laws and efforts to enforce them, including increasing on-site checks since 2015 (Government of Japan, 2025).

The U.S. EPA (2025b) reported that, in 2024, reclamation of ozone-depleting substances – including CFCs and HCFCs – had dropped to less than 60% of 2015 levels. However, U.S. HFC reclamation more than doubled over the same time period, with significant year-over-year increases from 2021–2023 (Maranion et al., 2025). There are fewer destruction data, although a small drop in HFC quantity destroyed from 2023–2024 was reported (U.S. EPA, 2025b).

Other countries reporting positive recent trends in refrigerant management include Canada (positive recent year-over-year trends in recovery and destruction of both HFCs and ozone-depleting substances) and China (annual growth rate of refrigerant recovery of 36%) (Maranion et al., 2025).

For leak reduction, we estimated the adoption ceiling to be 500 kt/yr of refrigerant release avoided (Table 4a). This represents what would be possible if no refrigerants leaked during use, which is not a realistic expectation. We calculated this by first estimating the quantity of global refrigerant contained in new or operational refrigeration, air conditioning, and heat pump equipment. We then applied a global average leak rate of 9% annually (see Appendix B) to the amount of refrigerant in operational equipment. 

End-of-life management has a lower ceiling, which we estimated to be 270 kt refrigerant release avoided/yr (Table 4b). This value reflects recovering and responsibly managing all refrigerants in decommissioned equipment each year. The U.S. EPA (2021) reported quantities of refrigerants potentially available from retired equipment for several countries or groups of countries, primarily the United States and the European Union. Using these data, we estimated that 3.9% of the U.S. refrigerant stock is available to recover each year, and extrapolated a global recovery quantity to be 3.9% of the global refrigerant stock.

Table 4. Adoption ceiling.

Unit: kt refrigerant release avoided/yr

Leak reduction 500

Unit: kt refrigerant release avoided/yr

End-of-life management 270

We anticipate that leak reduction could avoid 100–200 kt refrigerant release/yr (Table 5a). The high end of this range is the amount of in-use refrigerant release prevented by reducing the annual global leak average from 9% to 5%, which is a target set by multiple organizations that promote better monitoring and performance of refrigeration systems (Theodoridi et al., 2022; U.S. Green Building Council, 2021). The low end of the range represents getting halfway to this target globally (reaching a 7% average annual leak rate). Achieving 5–7% leak rates means reducing global refrigerant leaks by ~20–45% from current levels. This is consistent with recent literature that claims that robust leak prevention can prevent 20–50% of refrigerant leaks during use (Purohit et al., 2025). If actual leak rates are higher than the 9% estimate, more leak reduction may be possible. 

End-of-life management of refrigerant could reasonably avoid 130–200 kt refrigerant release/yr (Table 5b). In a 2011 report, UNEP estimated that 47.5% of the ozone-depleting refrigerant stock is reachable with low to medium effort (UNEP, 2011). This stock includes refrigerant chemicals used in applications such as foams. Assuming that this estimate is accurate today and applies to HFC refrigerants as well, we set the low achievable adoption as 47.5% of the adoption ceiling. This assumes all low- or medium-effort recovery happens followed by responsible destruction or reuse. For high achievable adoption, we assumed that more effort is expended to recover and manage waste refrigerant, with half of the refrigerant above the low- and medium-effort recovery level also being managed.

Table 5. Range of achievable adoption levels.

Unit: kt refrigerant release avoided/yr

Current adoption Not determined
Achievable – low 100
Achievable – high 200
Adoption ceiling 500

Unit: kt refrigerant release avoided/yr

Current adoption 29
Achievable – low 130
Achievable – high 200
Adoption ceiling 270

These are ambitious targets; countries with world-leading refrigerant recovery programs – such as Japan and Australia – recover only ~40% of refrigerant in end-of-life equipment today (Peixoto & Dhont, 2024). However, since refrigerants used in refrigeration, air conditioning, and heat pumps are easier to recover than other refrigerants considered in the reachable stock (Ashford & Kuijpers, 2009; U.S. EPA 2021), exceeding 47.5% recovery is feasible with strong policy and enforcement measures. 

For all types of refrigerant management, factors such as policies, enforcement mechanisms, refrigerant tracking, and refrigerant prices will impact future adoption. Barriers to adoption include high up-front costs and lack of infrastructure or reverse supply chains, particularly in low- and middle-income countries and less-populated areas (Maranion et al., 2026; Peixoto & Dhont, 2024).

Impacts

Leak reduction practices can reduce emissions 0.3–0.5 Gt CO₂‑eq/yr (100-yr basis, Table 6a), or 0.6–1.2 Gt CO₂‑eq/yr over a 20-yr time horizon. Preventing all leaks would reach an impact ceiling of 1 Gt CO₂‑eq/yr (100-yr, Table 6a) or 3 Gt CO₂‑eq/yr (20-yr), although stopping all leaks is unrealistic. If current leak rates are higher than our estimate, the impact potential of this solution is even greater than what we report here. Equipment with the highest charge sizes and leak rates (such as commercial or industrial refrigeration) have the greatest opportunity for a positive climate impact by reducing leaks (see Appendix B).

End-of-life management can reduce emissions 0.34–0.52 Gt CO₂‑eq/yr (100-yr basis, Table 6b). On a 20-year basis, the impact is 0.77–1.2 Gt CO₂‑eq/yr. We estimate the current impact from reusing or destroying refrigerant to be 0.08 Gt CO₂‑eq/yr (100-yr basis, Table 6b) or 0.17 Gt CO₂‑eq/yr (20-yr basis). If all refrigerants available for recovery are managed each year, this could reach an impact ceiling of 0.70 Gt CO₂‑eq/yr (100-yr basis, Table 6b) or 1.6 Gt CO₂‑eq/yr (20-yr basis).

Table 6. Climate impact at different levels of adoption.

Unit: Gt CO₂‑eq/yr, 100-year basis

Current adoption Not determined
Achievable – low 0.3
Achievable – high 0.5
Adoption ceiling 1

Unit: Gt CO₂‑eq/yr, 100-year basis

Current adoption 0.1
Achievable – low 0.34
Achievable – high 0.52
Adoption ceiling 0.7

UNEP’s Technology and Economic Assessment Panel (TEAP) estimates that leak prevention could mitigate 15.6 Gt CO₂‑eq and end-of-life management could mitigate 23.4 Gt CO₂‑eq cumulatively from 2025–2050 (Peixoto & Dhont, 2024). This estimate employs models of future HFC emission increases, while our climate impact estimate is based only on the current state of the sector and is not cumulative. We expect that managing refrigerant emissions will become more important over time due to population growth, rising standards of living, and a warming climate (Sachar et al., 2018).

As refrigerants transition to lower-GWP alternatives, managing release is still important but impact will decrease (see Deploy Alternative Refrigerants). However, particularly in the coming decades, taking action on leak reduction and end-of-life management together will ensure maximal climate benefits. Policies to mandate and incentivize these practices for end users, technicians, and businesses will be critical in scaling up refrigerant management and preventing warming.

Income and Work

Improving refrigerant management will require workforce training and can create more job opportunities (Mayhew et al., 2023; Peixoto & Dhont, 2024). Although research on the number of jobs created is limited, according to one UNEP TEAP report, investing in life-cycle refrigerant management could create 500,000 jobs in the United States alone (Peixoto & Dhont, 2024).

Refrigerant management, in particular leak reduction, can also save consumers money. Preventing leaks prevents emissions, conserves refrigerant and improves appliance efficiency (Mayhew et al., 2023; Peixoto & Dhont, 2024). When refrigerants are below optimal charge levels efficiency decreases, leading to higher energy expenditures. Refrigerant management practices reduce the need to purchase virgin HFC refrigerants, which are becoming more expensive as production phases down.

Health

For a description of the benefits to health, please refer to Air Quality below. 

Land Resources

For a description of the benefits to land resources, please refer to Air Quality below. 

Air Quality

Cooling appliances lose efficiency as refrigerant leaks from them. This results in higher energy use, which can increase emissions of air pollutants such as sulfur dioxide, nitrogen oxides and particulate matter from power plants (Purohit et al., 2025). Air quality can be improved by refrigerant leak prevention. 

Certain refrigerants in the global stock, particularly CFCs and HCFCs, can damage the ozone layer (Bolaji & Huan, 2013; Purohit et al., 2025). Refrigerant management reduces emissions of these ozone-depleting substances and is projected to prevent future ozone-depleting emissions (Purohit et al., 2025). Protecting the ozone layer ensures it can absorb harmful ultraviolet radiation, which can benefit human health, crop health, and food chains (Salawitch et al., 2019).

Non-fluorinated refrigerants can react with nitrogen oxides to form ground-level ozone, a major air pollutant that contributes to smog and harms human health (Peixoto & Dhont, 2024). Preventing refrigerant emissions can mitigate ground-level ozone formation.

F-gases used as refrigerants, such as HFCs, are considered per- and polyfluoroalkyl substances (PFAS) and can persist in the environment for centuries, posing serious human and ecosystem health risks (Dimitrakopoulou et al., 2024; Fenton et al., 2021). PFAS can decompose in the atmosphere to produce trifluoroacetic acid (TFA), which is not well-studied but may harm the environment and human health (Abdelaziz et al., 2023). Possible impacts of high atmospheric TFA concentrations include acid rain, accumulation in terrestrial ecosystems in water and plant matter, and harmful effects on the environment and organisms (Chele et al., 2024; Hanson et al., 2024). Fluorinated refrigerants can also indirectly harm the ozone layer and human health through their production and degradation products (Environmental Investigation Agency, 2025). Reducing the emissions of refrigerants could reduce atmospheric loading of PFAS and subsequent TFA deposition. This could improve air quality and mitigate risks to ecosystems and water resources.

Other

To achieve its climate goals, it is critical to implement refrigerant management responsibly and sustain it over time. Destruction can be considered a permanent emissions reduction, but other types of management could allow refrigerants to leak or be released in the future. That said, reuse and leak management both reduce the manufacture of new refrigerants (ACR, 2022), which is both an additional and permanent emission reduction.

Since much current refrigeration, air conditioning, and heat pump equipment can only be used with high-GWP refrigerants like HFCs, it is beneficial to recharge these appliances with reclaimed or recycled refrigerant instead of manufacturing new HFCs. Responsible management of any reused HFC refrigerant will prevent future emissions.

In some countries, certain end-of-life refrigerants are classified as hazardous wastes. The Basel Convention regulates the transfer of these materials between countries, creating refrigerant exporting challenges for nations without domestic refrigerant management infrastructure (Peixoto & Dhont, 2024). This can limit global adoption.

If refrigerant management is mandated by policy or regulations, we consider these emissions reductions to be additional over baseline emissions. However, some GHG accounting or crediting organizations would only count emissions not mandated by international, regional, or application-specific policy limits as additional.

Refrigerant destruction risks the potential formation of by-products such as dioxins, furans, acid gases, particulate matter, and carbon monoxide (Chao et al., 2024). These compounds can have adverse environmental or health effects if not responsibly managed. This risk can be mitigated by using conversion instead of incineration technologies and removing oil contaminants (Tope & Walter-Terrinoni, 2018).

More frequent refrigerant maintenance and recovery amplifies the risks that come with insufficient technician training in certain regions, including safety, accidental emissions, and refrigerant contamination.

Refrigerant management runs the risk of slowing the transition to alternative refrigerants, especially since reclaimed refrigerant does not count toward HFC consumption caps under the Kigali Amendment. Instead of purchasing new equipment designed for alternative refrigerants, reclaimed refrigerant can perpetuate the use of high-GWP refrigerants in older, leaky, and less efficient appliances (Peixoto & Dhont, 2024). 

Refrigerant management, in particular destruction, can require financial measures such as carbon credits to implement. However, creating new markets for refrigerant reuse or destruction risks financially incentivizing the perpetuated production of high-GWP refrigerants. The Environmental Investigation Agency (2024) recommends that destruction be required by policy rather than allowing carbon offsets to be sold. This prevents additional profits earned on polluting chemicals and mandates F-gas mitigation, an emergency brake action. 

Recovering and processing end-of-life refrigerants will generate emissions from transporting material that were not included in the calculations for this solution.

Recovered refrigerant can become contaminated if it is not properly managed. This can be due to insufficient compositional analysis or separation of refrigerant blends, impurities such as oil introduced from recovery equipment, or contaminated recovery cylinders (Peixoto & Dhont, 2024). Using contaminated refrigerant in equipment can reduce cooling performance and increase energy use, leading to increased power-generation GHG emissions (SuperCool Asia Pacific, 2022). Contaminated refrigerant also can damage equipment, increasing refrigerant leaks. This trade-off can be mitigated with high-quality compositional analysis of refrigerants and training for recovery practitioners.

Destruction technologies such as plasma arcs can require large amounts of energy, resulting in small indirect emission trade-offs from energy production. However, UNEP’s TEAP Task Force reports that these indirect emissions are negligible compared with the direct emissions prevented by refrigerant destruction (Tope & Walter-Terrinoni, 2018).

Reinforcing

Improved refrigerant management will lead to reduced GHG emissions from new food refrigeration equipment. Since decreasing food loss and waste might require increases in commercial, residential, and transport refrigeration (Babiker et al., 2023; Food and Agriculture Organization of the United Nations, 2019), it will be more effective with fewer fugitive refrigerant leaks. This impact will be strongest for large and currently leaky equipment such as supermarket refrigeration. However, if less food is produced to better manage food loss, this could instead lead to a decreased demand for cold storage and less reinforcing interaction between these solutions (Dong et al., 2021).

Heat pumps use refrigerants to absorb and release heat. Decreasing leaks of refrigerants in heat pumps will reduce emissions associated with heat pump use and increase the energy efficiency of heat pump systems. Therefore, heat pumps will provide even greater climate benefits.

Competing

Improving refrigerant management decreases the quantity of refrigerants emitted to the atmosphere. This means that the effectiveness and climate impact of using lower-GWP refrigerants will decrease. These solutions are complementary: although they reduce the impact of each other, implementing them together is overall beneficial to mitigation of refrigerant emissions.

Consensus of effectiveness in reducing emissions: High

Preventing release and fugitive emissions of refrigerant chemicals is highly effective at reducing global GHG emissions. Refrigerant management is considered one of the primary means for minimizing refrigeration, air conditioning, and heat pump emissions, in addition to switching to low-GWP refrigerants and increasing the energy efficiency of appliances.

UNEP’s Ozone Secretariat (2015) estimated that 60% of HFC refrigerant use was for replacing leaked refrigerant from refrigerators, air conditioners, and heat pumps. Purohit et al. (2025) claimed that implementing life-cycle refrigerant management during the use and end of life of refrigerators, air conditioners, and heat pumps could reduce HFC and HCFC GHG emissions about 39 Gt CO₂‑eq between 2025 and 2050. A report by the Environmental Investigation Agency, Institute for Governance & Sustainable Development, and Natural Resources Defense Council estimated that leak reduction and end-of-life management could reduce emissions by 91 Gt CO₂‑eq by 2100 (Theodoridi et al., 2022).

It is likely that the impact of this solution will decrease in future decades as high-GWP refrigerants are phased out. However, Liu et al. (2024) emphasized that emissions of current high-GWP refrigerants are time-lagged due to long equipment lifetimes. UNEP’s TEAP asserted that over short- and medium-term time frames, refrigerant management is critical to preventing emissions as cooling demands increase globally and the alternative refrigerant transition proceeds slowly (Peixoto & Dhont, 2024). Importantly, this solution mitigates emissions of ozone-depleting substances that both warm the climate and harm the ozone layer.

The results presented in this document summarize findings from seven peer-reviewed articles, 16 reports from nongovernmental organization and public sector authors, three news articles or websites, four datasets, one IPCC chapter, and eight national GHG inventory submissions to the United Nations. This reflects current evidence from 26 countries, primarily the European Union, United States, Australia, and Japan. Data from groups of countries are also factored in, including Annex 1 countries as identified by the United Nations, A5 and non-A5 parties, global averages, and Organisation for Economic Co-operation and Development (OECD) nations. We recognize this limited geographic scope creates bias, and hope this work inspires research and data sharing on this topic in underrepresented regions.

Take Action

Looking to get involved? Below are some key actions for this solution that can get you started, arranged according to different roles you may play in your professional or personal life.

These actions are meant to be starting points for involvement and are not intended to be prescriptive or necessarily suggest they are the most important or impactful actions to take. We encourage you to explore and get creative!

Lawmakers and Policymakers

  • Develop national cooling plans and integrate them into national climate plans.
  • Ensure existing public refrigeration systems have robust monitoring, maintenance, and end-of-life servicing to eliminate leaks and recover refrigerants; ensure procurement uses as much reclaimed refrigerant as possible; use public procurement for demonstration projects and to increase industry awareness. 
  • Ban venting or intentional releases of HFCs, CFCs, and HCFCs, require regular equipment maintenance, and track equipment to help enforcement; ban the practice of filling leaking equipment without fixing the leak first.
  • Create infrastructure and regulatory frameworks requiring and/or strongly incentivizing leak prevention and the recovery, reclamation, recycling, and destruction of refrigerants; impose legal responsibilities for operators to ensure proper end-of-life servicing for equipment; create strong and effective enforcement mechanisms, including through improved reporting requirements, protected whistleblower complaint channels, and refrigerant audit programs similar to energy audit programs.
  • Offer financial incentives such as tax breaks, subsidies, grants, loan guarantees, and concessional financing for reclamation, distillation, recycling, and destruction of refrigerants; ensure financial incentives sufficiently reward technicians to incentivize best practices and participation; create targeted incentive programs for small and independent retailers; invest in or incentivize the creation of circular supply chains; offer similar incentives for simple, cost-effective retrofits such as changing fittings on refrigerant piping. 
  • Coordinate refrigerant management policies horizontally (e.g., across agencies) and vertically (e.g., across subnational, national, and international efforts).
  • Ban or seek to deter the practice of offloading outdated cooling equipment to low- and middle-income countries.
  • Set minimum standards for installation practices and detection and repair of leaks; require automatic leak detection systems; offer financial incentives for products that decrease or eliminate leaks.
  • If not currently in place, set certification requirements to purchase and handle refrigerants.
  • Work with industry to develop workforce training programs; update certification requirements when necessary; require certification renewal for technicians trained with prior programs.
  • Require detailed recordkeeping for vendors, contractors, and technicians to track and report on refrigerant types and amounts in use and at disposal; consider requirements for electronic tracking systems on refrigerants.
  • Create and maintain databases on refrigerant use, recovery, recycling, and destruction rates to identify highest priority areas and/or industries for improving refrigerant management.
  • Ensure producers bear the cost of recovery, reclamation, and destruction; enact Extended Consumer Responsibility requirements; require up-front deposits for refrigerants or create a pool fund by taxing producers, then use the pool to pay technicians to carry out recovery, reclamation, and destruction.
  • Enact requirements for retailers and installers to inform customers that only qualified professionals are legally allowed to handle refrigerant equipment. 
  • Invest in R&D to improve reclamation, recycling, and distillation technologies; destruction methods; and leak detection and repair.
  • Offer educational resources, creating one-stop shops for information on improved refrigerant management and energy efficiency; offer demonstrations, highlighting their cost savings and climate benefits.
  • Create, support, or join networks and partnerships dedicated to improving refrigerant management.
  • Combat illegal trade of refrigerants through measures such as import and export quotas, robust permitting and customs inspections, banning disposable cylinders, and enhancing refrigerant supply chain traceability.

Practitioners

  • Avoid venting or intentionally releasing refrigerants and conduct regular maintenance on equipment.
  • Improve refrigeration systems to include robust monitoring, maintenance, and end-of-life servicing to eliminate leaks and recover refrigerants
  • Ensure procurement uses as much reclaimed refrigerant as possible instead of new. 
  • Take advantage of financial incentives such as subsidies, tax credits, and grants to improve refrigerant management practices.
  • Set voluntary targets for leak repair and management; deploy automatic leak detection systems; invest in low-cost and effective retrofitting options such as changing fittings on refrigerant piping.
  • Improve building, operations, and cooling designs to reduce demand for refrigerants.
  • Create industry-led voluntary agreements that help achieve and/or exceed regulatory requirements for refrigerant management; prepare the industry for phaseouts of high-GWP refrigerants.
  • Help create the infrastructure for end-of-life recovery, reclamation, and destruction of refrigerants; help develop guidelines for technicians in refrigeration management.
  • Maintain detailed records to track and report on refrigerant types and amounts in use.
  • Invest in R&D to improve reclamation, recycling, and distillation technologies; destruction methods; and leak repair.
  • Do not fill leaking equipment without repairing the leaks first. 
  • Collaborate with other industry stakeholders to produce a publicly available database on best practices for installation, retrofitting, reclamation, and end-of-life servicing.
  • When possible, use recycled refrigerants immediately at the point of recovery or reclaimed refrigerants to reduce demand for virgin high-GWP refrigerants. 
  • Require refrigerant reclamation and the use of reclaimed refrigerants for appropriate equipment.
  • Implement an array of safety protocols to reduce the risk of leaks and exposure, such as restricting refrigerant charge sizes and improving ventilation and leak sensors.
  • Help create high-integrity carbon markets for reclaimed refrigerants, ensuring markets do not inadvertently increase waste gas generation.
  • Ensure relevant staff and technicians are properly certified for their roles; renew certification credentials when new regulations are created.
  • Clearly warn customers that only qualified technicians should handle the equipment and refrigerants; inform them of servicing requirements and warranty terms and conditions.
  • Participate in certification schemes that identify which businesses use improved refrigerant management.
  • Create, support, or join networks or partnerships dedicated to advancing improved refrigerant management.

Business Leaders

  • Establish time-bound, transparent targets for improving refrigerant management.
  • Improve refrigeration systems to include robust monitoring, maintenance, and end-of-life servicing; ensure procurement uses as much reclaimed refrigerant as possible. 
  • Improve building, operations, and cooling designs to reduce demand for refrigerants.
  • Commit to exceeding regulatory requirements for refrigerants and energy efficiency in operations. 
  • Take advantage of financial incentives such as subsidies, tax credits, and grants for improved refrigerant management.
  • Help create high-integrity carbon markets for reclaimed refrigerants, ensuring markets do not inadvertently increase waste gas generation.
  • Help create reverse supply chains and build a circular economy for refrigerants.
  • Support workforce development programs, offer employee scholarships, and/or sponsor training for careers in refrigerant management, including end-of-life services.
  • Adopt extended producer responsibility and hold suppliers accountable to the same standards when possible.
  • Maintain detailed records to track and report on refrigerant types and amounts in use; request and maintain records from suppliers.
  • Participate in certification schemes that identify businesses that use improved refrigerant management.
  • Advocate for bans on venting or intentional release of refrigerants, requirements for regular maintenance, and refrigerant or equipment tracking programs to help enforcement.
  • Create, support, or join networks or partnerships dedicated to advancing improved refrigerant management.

Nonprofit Leaders

  • Improve refrigeration systems to include robust monitoring, maintenance, and end-of-life servicing to eliminate leaks and reclaim refrigerants; ensure procurement uses as much reclaimed refrigerant as possible. 
  • Improve building, operations, and cooling designs to reduce demand for refrigerants.
  • Help develop guidelines and infrastructure for end-of-life reclamation, recycling, and/or destruction of refrigerants.
  • Help create reverse supply chains and build a circular economy for refrigerants.
  • Help translate and improve technical manuals for related equipment; work with manufacturers to improve communications and translations.
  • Advocate for bans on venting or intentional releases of refrigerants, requirements for regular maintenance, and refrigerant or equipment tracking programs to help enforcement.
  • Help develop national cooling plans and integrate them into national climate plans.
  • Work with industry to develop workforce training programs; help update certification requirements when necessary and assist with certification renewal for technicians trained under prior programs.
  • Advocate for extended producer responsibility to hold producers accountable for refrigerant product safety and recovery.
  • Help with technology transfer to low- and middle-income countries to improve low-cost adoption.
  • Advocate for bans or deterrents to the practice of offloading inefficient cooling equipment in low- and middle-income countries.
  • Help develop refrigerant audit programs similar to energy audit programs.
  • Offer educational resources, creating one-stop shops for information on improved refrigerant management and energy efficiency; offer demonstrations, highlighting cost savings and climate benefits.
  • Administer or participate in certification schemes that identify which businesses use improved refrigerant management.
  • Create, support, or join networks or partnerships dedicated to advancing improved refrigerant management.

Investors

  • Ensure portfolio companies use or have a credible plan to improve refrigerant management in their operations and throughout the rest of their supply chains.
  • Invest in start-ups working to improve all aspects of refrigerant management and circular economies.
  • Ensure infrastructure investment projects leverage building, operations, and cooling designs that reduce demand for refrigerants.
  • Invest in companies that adopt extended consumer responsibility and/or have a proven track record of reclamation, recycling, and responsible destruction of refrigerants.
  • Offer preferential loan agreements for companies improving their refrigerant management.
  • Offer innovative financing methods such as microloans, or invest in green bonds supporting projects that improve refrigerant management.
  • Invest in R&D to improve refrigerant reclamation, recycling, and distillation technologies, destruction methods, and leak repair.
  • Create, support, or join networks or partnerships dedicated to advancing improved refrigerant management.

Philanthropists and International Aid Agencies

  • If applicable, improve refrigeration systems to include robust monitoring, maintenance, and end-of-life servicing to eliminate leaks and recover refrigerants; ensure procurement uses as much reclaimed refrigerant as possible. 
  • If applicable, improve building, operations, and cooling designs to reduce demand for refrigerants.
  • Offer grants for start-ups working to improve all aspects of refrigerant management and circular economies.
  • Offer innovative financing methods such as microloans and green bonds to invest in projects that are improving refrigerant management.
  • Invest in R&D to improve reclamation, recycling, and distillation technologies; destruction methods; and leak repair.
  • Help develop guidelines and infrastructure for reclamation and destruction of refrigerants.
  • Help create reverse supply chains and build a circular economy for refrigerants.
  • Help translate and improve technical manuals for related equipment; work with manufacturers to improve communications and translations.
  • Advocate for bans on venting or intentional releases of refrigerants, requirements for regular maintenance, and refrigerant or equipment tracking programs to help enforcement.
  • Help develop national cooling plans and integrate them into national climate plans.
  • Work with industry to develop workforce training programs; help update certification requirements when necessary and assist with certification renewal for technicians trained with prior programs.
  • Advocate for extended producer responsibility approaches that hold producers accountable for refrigerant product safety and recovery.
  • Assist with technology transfer to low- and middle-income countries to help improve low-cost adoption.
  • Advocate for bans or deterrents to the practice of offloading inefficient cooling equipment to low- and middle-income countries.
  • Help develop refrigerant audit programs similar to energy audit programs.
  • Offer educational resources, creating one-stop shops for information on improved refrigerant management and energy efficiency; offer demonstrations, highlighting their cost savings and climate benefits.
  • Administer or participate in certification schemes that identify which businesses use improved refrigerant management.
  • Create, support, or join networks or partnerships dedicated to advancing improved refrigerant management.

Thought Leaders

  • Help develop guidelines and infrastructure for reclamation, recycling, and destruction of refrigerants.
  • Help create reverse supply chains and build a circular economy for refrigerants.
  • Help translate and improve technical manuals for related equipment; work with manufacturers to improve communications and translations.
  • Advocate for bans on venting or intentional releases of refrigerants, requirements for regular maintenance, and refrigerant or equipment tracking programs to help enforcement.
  • Help develop national cooling plans and integrate them into national climate plans.
  • Work with industry to develop workforce training programs; help update certification requirements when necessary, and assist with certification renewal for technicians trained with prior programs.
  • Advocate for extended producer responsibility approaches that hold producers accountable for refrigerant product safety and recovery.
  • Assist with technology transfer to low- and middle-income countries to help improve low-cost adoption.
  • Advocate for bans or deterrents to the practice of offloading inefficient cooling equipment in low- and middle-income countries.
  • Help develop refrigerant audit programs similar to energy audit programs.
  • Offer educational resources, creating one-stop shops for information on improved refrigerant management and energy efficiency; offer demonstrations, highlighting cost savings and climate benefits.
  • Administer or participate in certification schemes that identify businesses that use improved refrigerant management.
  • Create, support, or join networks or partnerships dedicated to advancing improved refrigerant management.

Technologists and Researchers

  • Improve refrigerant reclamation, recycling, and distillation technologies, destruction methods, and leak detection and repair.
  • Design equipment for detecting refrigerant leaks or recovering and processing refrigerants of all chemistries, including low-GWP alternative refrigerants and blends.
  • Design new refrigeration systems that reduce or eliminate leaks during operation; improve energy efficiency of existing or new systems; innovate equipment designs that facilitate installation, maintenance, and end-of-life servicing.
  • Develop software to track types and quantities of refrigerants in use; explore the use of the Internet of Things to track refrigerants through valve and gauge connections.
  • Develop more robust tracking and data around end-of-life refrigerants.
  • Research other traditional methods of cooling and food storage; develop means of scaling relevant methods; find practical means of integrating traditional methods with modern lifestyles.

Communities, Households, and Individuals

  • Buy efficient appliances with the lowest amount of refrigerant needed for their function.
  • Have refrigeration, heat pump, and air-conditioning appliances maintained and checked for leaks regularly by a trained professional.
  • Research options for responsible disposal of refrigerant-containing appliances in your area.
  • Consult a professional about reducing leaks or improving refrigerant management at home; never tamper with or attempt to handle refrigerants without proper certification.
  • Advocate for extended producer responsibility approaches that hold producers accountable for refrigerant product safety and recovery.
  • Advocate for bans on venting or intentional releases of refrigerants, requirements for regular maintenance, and refrigerant or equipment tracking programs to help enforcement.
  • Explore and integrate other traditional methods of cooling and food storage, if relevant.

References

Abdelaziz, O., Polonara, F., Peixoto, R., & Kuijpers, L. (2023). Refrigeration, Air Conditioning and Heat Pumps Technical Options Committee: 2022 assessment report. United Nations Environment Programme. Link to source: https://iifiir.org/en/fridoc/montreal-protocol-on-substances-that-deplete-the-ozone-layer-2022-146932 

ACR. (2022). Methodology for the quantification, monitoring, reporting and verification of greenhouse gas emission reductions and removals from certified reclaimed HFC refrigerants, propellants, and fire suppressants (Version 2.0). Link to source: https://acrcarbon.org/methodology/certified-reclaimed-hfc-refrigerants-propellants-and-fire-suppressants/ 

Amendment to the Montreal Protocol on substances that deplete the ozone layer. (2016, October 15). Link to source: https://treaties.un.org/doc/Treaties/2016/10/20161015%2003-23%20PM/Ch_XXVII-2.f-English%20and%20French.pdf 

Ashford, P., & Kuijpers, L. (2009). Report of the Technology and Economic Assessment Panel: Task Force decision XX/7 report on environmentally sound management of banks of ozone-depleting substances. United Nations Environment Programme. Link to source: https://ozone.unep.org/sites/default/files/2019-05/teap-june-2009-decisionXX-7-task-force-report.pdf 

Babiker, M., Berndes, G., Blok, K., Cohen, B., Cowie, A., Geden, O., Ginzburg, V., Leip, A., Smith, P., Sugiyama, M., & Yamba, F. (2023). Cross-sectoral perspectives. In P. R. Shukla, J. Skea, R. Slade, A. Al Khourdajie, R. van Diemen, D. McCollum, M. Pathak, S. Some, P. Vyas, R. Fradera, M. Belkacemi, A. Hasija, G. Lisboa, S. Luz, & J. Malley (Eds.), Climate change 2022: Mitigation of climate change. Contribution of working group III to the sixth assessment report of the Intergovernmental Panel on Climate Change (pp. 1245–1354). Cambridge University Press; Cambridge Core.  Link to source: https://doi.org/10.1017/9781009157926.014 

Benedetti, C. (2023). Lifecycle refrigerant management actions. Yale Carbon Containment Lab. Link to source: https://carboncontainmentlab.org/publications/lrm-mop-35

Bolaji, B. O., & Huan, Z. (2013). Ozone depletion and global warming: Case for the use of natural refrigerant – a review. Renewable and Sustainable Energy Reviews, 18, 49–54.  Link to source: https://doi.org/10.1016/j.rser.2012.10.008 

Chao, T., Crotty, S., Mayhew, C., Phillips, E., O’Rourke, A., & Takahashi, D. (2024). Recovery and destruction of hydrofluorocarbon refrigerant gases in Article 5 countries. Carbon Containment Lab.  Link to source: https://carboncontainmentlab.org/documents/draft-methodology-for-recovery-and-destruction-of-hydrofluorocarbons-in-article-5-countries_v2.1.pdf 

Chele, F. S., Salvador, C., Stevenson, L., Dolislager, F., Armstrong, A., Power, S., Mathews, T., & Yana Motta, S. F. (2024). Critical literature review of low global warming potential (GWP) refrigerants and their environmental impact. Oak Ridge National Laboratory. Link to source: https://www.osti.gov/servlets/purl/2528023 

Dimitrakopoulou, M.-E., Karvounis, M., Marinos, G., Theodorakopoulou, Z., Aloizou, E., Petsangourakis, G., Papakonstantinou, M., & Stoitsis, G. (2024). Comprehensive analysis of PFAS presence from environment to plate. Npj Science of Food, 8(1), 80. Link to source: https://doi.org/10.1038/s41538-024-00319-1 

Dong, Y., Coleman, M., & Miller, S. A. (2021). Greenhouse gas emissions from air conditioning and refrigeration service expansion in developing countries. Annual Review of Environment and Resources, 46, 59–83. Link to source: https://doi.org/10.1146/annurev-environ-012220-034103

Dreyfus, G., Wei, M., Shah, N., & Taddonio, K. (2023). Ambitious replenishment of the Multilateral Fund for Implementation of the Montreal Protocol delivers high impact climate benefits at low cost. Institute For Governance & Sustainable Development & Lawrence Berkeley National Laboratory. Link to source: https://www.igsd.org/publications/ambitious-replenishment-of-the-multilateral-fund-for-implementation-of-the-montreal-protocol-delivers-high-impact-climate-benefits-at-low-cost/ 

Environmental Investigation Agency (2024). Polluting the Protocol: How carbon trading undermines the Montreal Protocol on Substances that Deplete the Ozone Layer. Link to source: https://eia.org/wp-content/uploads/2024/10/2024-EIA-MOP36-Polluting-the-Protocol-2.pdf 

Environmental Investigation Agency. (2025). Persistent problems: The hidden impacts of hydrofluoroolefins, the latest generation of fluorinated gases. Link to source: https://eia.org/report/persistent-problems/ 

Eunomia Research & Consulting Ltd & Centre for Air Conditioning and Refrigeration Research. (2014). Impacts of leakage from refrigerants in heat pumps. U.K. Department of Energy and Climate Change. Link to source: https://eunomia.eco/reports/impacts-of-leakage-from-refrigerants-in-heat-pumps/ 

Fenton, S. E., Ducatman, A., Boobis, A., DeWitt, J. C., Lau, C., Ng, C., Smith, J. S., & Roberts, S. M. (2021). Per- and polyfluoroalkyl substance toxicity and human health review: Current state of knowledge and strategies for informing future research. Environmental Toxicology and Chemistry, 40(3), 606–630. Link to source: https://doi.org/10.1002/etc.4890 

Food and Agriculture Organization of the United Nations. (2019). The state of food and agriculture 2019: Moving forward on food loss and waste reduction.  Link to source: https://openknowledge.fao.org/server/api/core/bitstreams/11f9288f-dc78-4171-8d02-92235b8d7dc7/content  

Goetzler, W., Guernsey, M., Young, J., Fuhrman, J., & Abdelaziz, O. (2016). The future of air conditioning for buildings. U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Building Technologies Office. Link to source: https://www.osti.gov/biblio/1420235

Government of Japan (2025). Sharing information on activities related to life-cycle refrigerant management, pursuant to para 3 of Decision XXXVI/2. Link to source: https://ozone.unep.org/sites/default/files/additional-reported-information/decisionXXXVI2/Japan.pdf 

Hanson, M. L., Madronich, S., Solomon, K., Sulbaek Andersen, M. P., & Wallington, T. J. (2024). Trifluoroacetic acid in the environment: Consensus, gaps, and next steps. Environmental Toxicology and Chemistry, 43(10), 2091–2093. Link to source: https://doi.org/10.1002/etc.5963 

Heubes, J., Gloël, J., & Papst, I. (2017). Global roadmap on ODS bank management: Management and destruction of existing ozone depleting substances banks. Deutsche Gesellschaft für Internationale Zusammenarbeit (GIZ) GmbH. Link to source: https://www.international-climate-initiative.com/en/iki-media/publication/global_roadmap_on_ods_bank_management/ 

Japan Ministry of the Environment. (2025). Report on measureable outcomes of fluorocarbons in Japan in FY2023. Link to source: https://drive.google.com/file/d/19XaFRdoJqw6Jn8vI9rM4e3GjE_8JUHHN/view

Lickley, M. J., Daniel, J. S., Fleming, E. L., Reimann, S., & Solomon, S. (2022). Bayesian assessment of chlorofluorocarbon (CFC), hydrochlorofluorocarbon (HCFC) and halon banks suggest large reservoirs still present in old equipment. Atmospheric Chemistry and Physics, 22(17), 11125–11136. Link to source: https://doi.org/10.5194/acp-22-11125-2022 

Liu, H., Duan, H., Zhang, N., Ma, Y., Liu, G., Miller, T. R., Mao, R., Xu, M., Li, J., & Yang, J. (2024). Rethinking time-lagged emissions and abatement potential of fluorocarbons in the post-Kigali Amendment era. Nature Communications, 15(1), 6687. Link to source: https://doi.org/10.1038/s41467-024-51113-2 

Maranion, B., Pizano, M., & Woodcock, A. (2025). Report of the Technology and Economic Assessment Panel: Volume 1: Progress report. United Nations Environment Programme.  Link to source: https://ozone.unep.org/system/files/documents/TEAP-May2025-Progress-Report-vol1.pdf 

Maranion, B., Pizano, M., & Woodcock, A. (2026). Report of the Technology and Economic Assessment Panel: Volume 1: Progress report. United Nations Environment Programme. Link to source: https://ozone.unep.org/system/files/documents/TEAP-May2026-Progress-Report-vol1.pdf 

Mayhew, C., Chao, T., & O’Rourke, A. (2023). Lifecycle refrigerant management: Maximizing the atmospheric and economic benefits of the Montreal Protocol. Yale Carbon Containment Lab. Link to source: https://carboncontainmentlab.org/publications/lrm-mop-35 

Montreal protocol on substances that deplete the ozone layer. (1987, September 16). Link to source: https://treaties.un.org/doc/publication/unts/volume%201522/volume-1522-i-26369-english.pdf 

Ohnishi, K., Tope, H., & Zhang, J. (2022). Report of the Medical and Chemical Technical Options Committee: 2022 assessment report. United Nations Environment Programme. Link to source: https://ozone.unep.org/node/13470 

Öko-Recherche. (2025). Monitoring of refrigerant prices on the EU market: Results of quarterly survey: Quarter 4/2025. Link to source: https://climate.ec.europa.eu/document/download/bed3e33e-3c12-4f6d-99c3-b1694418c4de_en?filename=Price%20monitoring%20Q4_2025.pdf 

Ozone Secretariat. (2015). Fact sheet 2: Overview of HFC market sectors. United Nations Environment Programme. Link to source: https://ozone.unep.org/sites/ozone/files/Meeting_Documents/HFCs/FS_2_Overview_of_HFC_Markets_Oct_2015.pdf 

Ozone Secretariat. (2026). Country data: Destruction of controlled substances [Dataset]. United Nations Environment Programme. Link to source: https://ozone.unep.org/countries/data 

Peixoto, R., & Dhont, H. (2024). Report of the Technology and Economic Assessment Panel: Decision XXXV/11 Task Force report on life cycle refrigerant management. United Nations Environment Programme. Link to source: https://ozone.unep.org/system/files/documents/TEAP-May2024-DecXXXV-11-TF-Report.pdf 

Purohit, P., Chao, T., Cooke, R., Dhont, H., Kaur, R., Peixoto, R., Walter-Terrinoni, H., & Woodcock, A. (2025). The importance of lifecycle refrigerant management in climate and ozone protection. Sustainability, 17(1), 53. Link to source: https://doi.org/10.3390/su17010053 

Sachar, S., Campbell, I., & Kalanki, A. (2018). Solving the global cooling challenge: How to counter the climate threat from room air conditioners. Rocky Mountain Institute. Link to source: https://rmi.org/wp-content/uploads/2018/11/Global_Cooling_Challenge_Report_2018.pdf 

Salawitch, R. J., Fahey, D. W., Hegglin, M. I., McBride, L. A., Tribett, W. R., & Doherty, S. J. (2019). Twenty questions and answers about the ozone layer: 2018 update, scientific assessment of ozone depletion: 2018. World Meteorological Organization. Link to source: https://csl.noaa.gov/assessments/ozone/2018/twentyquestions/ 

SuperCool Asia Pacific. (2022). Refrigerated display cabinet report UTR-165 (No. 200012551). Link to source: https://www.dcceew.gov.au/environment/protection/ozone/publications/bench-testing-results-refrigeration-air-conditioning-equipment 

Theodoridi, C., Hillbrand, A., Starr, C., Mahapatra, A., & Taddonio, K. (2022). The 90 billion ton opportunity: Lifecycle refrigerant management. Environmental Investigation Agency, Institute for Governance & Sustainable Development, & Natural Resources Defense Council. Link to source: https://eia.org/report/20221020-the-90-billion-ton-opportunity/ 

Tope, H., & Walter-Terrinoni, H. (2018). Report of the Technology and Economic Assessment Panel: Volume 1: Decision XXIX/4 TEAP Task Force report on destruction technologies for controlled substances (addendum to the May 2018 supplemental report – revision). United Nations Environment Programme. Link to source: https://ozone.unep.org/sites/default/files/2019-04/TEAP-DecXXIX4-TF-Addendum-to-May2018-Report_September2018.pdf 

United Nations Environment Programme. (2011). 2010 assessment report of the Technology and Economic Assessment Panel. Link to source: https://ozone.unep.org/node/3701 

U.S. Environmental Protection Agency. (2019). Global non-CO2 greenhouse gas emission projections & marginal abatement cost analysis: Methodology documentation. Link to source: https://www.epa.gov/sites/default/files/2019-09/documents/nonco2_methodology_report.pdf 

U.S. Environmental Protection Agency. (2021). ODS destruction in the United States and abroad. Link to source: https://www.epa.gov/system/files/documents/2022-08/April%202021%20ODS%20Destruction%20in%20the%20United%20States%20and%20Abroad%20Report.pdf 

U.S. Environmental Protection Agency. (2024). Analysis of the U.S. hydrofluorocarbon reclamation market: Stakeholders, drivers, and practices. Link to source: https://www.regulations.gov/document/EPA-HQ-OAR-2022-0606-0169 

U.S. Environmental Protection Agency. (2025a). Expanded HFC data. Link to source: https://www.epa.gov/hfcs/hfc-data-hub/expanded-hfc-data#hfc-Production 

U.S. Environmental Protection Agency. (2025b). Section 608 total material reclaimed 2017–2024 [Data set]. Link to source: https://www.epa.gov/section608/summary-refrigerant-reclamation-trends 

U.S. Green Building Council. (2021). Environmentally responsible refrigerant selection. Link to source: https://www.usgbc.org/sites/default/files/2021-02/Refrigerant%20Management%200211.pdf  

Vehlow, J., & Gloël, J. (2020). Thermal destruction of (hydro)chlorofluorocarbons and hydrofluorocarbons. Deutsche Gesellschaft für Internationale Zusammenarbeit (GIZ) GmbH. Link to source: https://www.green-cooling-initiative.org/news-media/publications/publication-detail/2020/06/30/thermal-destruction-of-hydrochlorofluorocarbons-and-hydrofluorocarbons 

Appendix

Appendix A: Calculation of Emissions Reductions

We calculated the reduction in GHG emissions for improved refrigerant management as follows:

Leak Reduction

Emissions from leaked refrigerant are due to:

  • direct F-gas emissions from leaked refrigerant entering the atmosphere
  • manufacturing emissions from producing virgin refrigerant to replace leaked refrigerant.

Equation A1.

\[ Avoided\ emissions\ per\ kt\ of\ leaked\ refrigerant\ prevented\\ =\ [1\ kt\ leaked\ refrigerant\ direct\ emissions]\ +\ [production\ emissions\ for\ 1\ kt\ virgin\ refrigerant]\]

End-of-Life Management

Emissions from end-of-life refrigerant are due to:

  • direct F-gas emissions from refrigerant release to the atmosphere as a result of improper disposal during maintenance or end-of-life
  • manufacturing emissions from producing virgin refrigerant to fill replacement or serviced equipment.

Emissions from reuse or destruction practices include:

  • process emissions from recovery and reclamation or recycling
  • process emissions from recovery and destruction.

Equation A2.

\[ Avoided\ emissions\ per\ kt\ of\ recovered\ and\ reused\ refrigerant\\ = [1\ kt\ released\ refrigerant\ direct\ emissions]\\ - [process\ emissions\ for\ 1\ kt\ recovered\ and\ reclaimed\ or\ recycled\ refrigerant] \\ + [production\ emissions\ for\ 1\ kt\ virgin\ refrigerant]\]

Equation A3.

\[ Avoided\ emissions\ per\ kt\ of\ recovered\ and\ destroyed\ refrigerant\\ = [1\ kt\ released\ refrigerant\ direct\ emissions]\\ - [process\ emissions\ for\ 1\ kt\ recovered\ and\ destroyed\ refrigerant]\]

Overall avoided emissions per kt of refrigerant managed at end-of-life:

Equation A4.

\[ Average\ avoided\ emissions\ per\ kt\ of\ refrigerant\ managed\ at\ end\text{-}of\text{-}life\\ =\ \frac{1}{2}\ ([avoided\ emissions\ from\ 1\ kt\ recovery\ and\ reuse] +\\ [avoided\ emissions\ from\ 1\ kt\ recovery\ and\ destruction])\]

Because survey data indicating the quantity of refrigerants reclaimed and destroyed are not available, we assumed that equal amounts of reclamation and destruction are performed for each kt of refrigerant managed and took the average of the values for these two practices. Our current adoption results suggest that this assumption is reasonable. 

In some cases, we could not calculate 20-year values for these process emissions and assumed that they were equivalent to the 100-year values; while the 20-year values are likely to be higher, this had little impact on the overall effectiveness result.

For more details and sources, see Supporting Data.

Appendix B: Calculation of Global Leak Rate

The rate of refrigerant leaked from equipment during use can vary greatly depending on the type and size of the equipment as well as other factors, such as location. Table A1 shows the breakdown by application that we used to estimate a single representative global leak rate. This is a broad estimate and not intended to represent specific applications.

Table A1. Estimated leak rates for various refrigerant applications.

Application 2015 Refrigerant
consumption (kt)
Weight factor
(% consumption)
Leak rate
(annual %)
Residential refrigeration 65 7.13 0.7
Commercial refrigeration 149 16.34 15
Industrial refrigeration 105 11.51 8.0
Transport refrigeration 65 7.13 20
Stationary air conditioning 396 43.42 6
Mobile air conditioning 132 14.47 12

Weighted average leak rate = 9%

Leak rates for each application are a median from several sources. Certain applications were particularly challenging to assign a single representative leak rate. For example, commercial refrigeration comprises many types of equipment, each with a different leak rate. Although we found many unit-specific estimates for leak rates, we do not have data on the prevalence of each equipment type. Therefore, we could not estimate a weighted average from these data and instead only used sources estimating leak rates across commercial refrigeration as a whole. We also excluded large quantities of data on stationary and mobile air conditioning from our analysis for this reason. Our overall leak rate estimate would be much more accurate with more data around the prevalence, charge sizes, and leak rates for specific equipment globally; this would allow us to understand the quantity of refrigerant stock to which to apply each annual leak rate into a better weighted average.

The U.S. EPA considers 20%, 30%, and 10% leak rates from commercial refrigeration, industrial refrigeration, and domestic appliances, respectively, to warrant leak repair (Phasedown of Hydrofluorocarbons, 2021). Our application-specific leak rates were well below these thresholds, suggesting that our estimate of released refrigerant may be lower than real-world leak rates. 

For more details, see Supporting Data. Data sources for determining leak rates and consumption percentages are listed here (not every source was used for every application):

Ashford, P., Baker, J. A., Clodic, D., Devotta, S., Godwin, D., Harnisch, J., Irving, W., Jeffs, M., Kuijpers, L., McCulloch, A., Peixoto, R., Uemura, S., & Verdonik, D. P. (2006). Emissions of fluorinated substitutes for ozone depleting substances. In S. Eggleston, L. Buendia, K. Miwa, T. Ngara, & K. Tanabe (Eds.), 2006 IPCC guidelines for national greenhouse gas inventories: Industrial processes and product use. Institute for Global Environmental Strategies, Japan. https://www.ipcc-nggip.iges.or.jp/public/2006gl/pdf/3_Volume3/V3_7_Ch7_ODS_Substitutes.pdf 

Booten, C., Nicholson, S., Mann, M., & Abdelaziz, O. (2020). Refrigerants: Market trends and supply chain assessment. https://www.osti.gov/biblio/1599577

California Public Utilities Commission. (2022). Refrigerant avoided cost calculator [Data set]. https://www.cpuc.ca.gov/dercosteffectiveness 

CLASP & Institute for Governance & Sustainable Development. (2020). Environmentally harmful dumping of inefficient and obsolete air conditioners in Africa. https://www.clasp.ngo/research/all/environmentally-harmful-dumping-of-inefficient-and-obsolete-air-conditioners-in-africa/?success=1 

Department of Climate Change, Energy, the Environment and Water. (2025). National greenhouse accounts factors. Australian Government. http://www.dcceew.gov.au/climate-change/publications/national-greenhouse-accounts-factors 

ICF. (2016). Accounting tool to support federal reporting of hydrofluorocarbon emissions: Supporting documentation. https://www.epa.gov/snap/accounting-tool-support-federal-reporting-hydrofluorocarbon-emissions

Koronaki, I. P., Cowan, D., Maidment, G., Beerman, K., Schreurs, M., Kaar, K., Chaer, I., Gontarz, G., Christodoulaki, R. I., & Cazauran, X. (2012). Refrigerant emissions and leakage prevention across Europe – Results from the RealSkillsEurope project. Energy, 45(1), 71–80. https://doi.org/10.1016/j.energy.2012.05.040

United Nations Framework Convention on Climate Change. (2023). National inventory submissions, Annex 1 parties [Data set]. https://unfccc.int/ghg-inventories-annex-i-parties/2023 

U.S. Environmental Protection Agency. (2024). Annexes to the inventory of U.S. greenhouse gas emissions and sinks. https://www.epa.gov/ghgemissions/inventory-us-greenhouse-gas-emissions-and-sinks-1990-2022

U.S. Environmental Protection Agency. (n.d.). GreenChill: Partnership accomplishments. https://www.epa.gov/greenchill/partnership-accomplishments 

Velders, G. J. M., Daniel, J. S., Montzka, S. A., Vimont, I., Rigby, M., Krummel, P. B., Muhle, J., O’Doherty, S., Prinn, R. G., Weiss, R. F., & Young, D. (2022). Projections of hydrofluorocarbon (HFC) emissions and the resulting global warming based on recent trends in observed abundances and current policies. Atmospheric Chemistry and Physics, 22(9), 6087–6101. https://doi.org/10.5194/acp-22-6087-2022 

Velders, G. J. M., Fahey, D. W., Daniel, J. S., Andersen, S. O., & McFarland, M. (2015). Future atmospheric abundances and climate forcings from scenarios of global and regional hydrofluorocarbon (HFC) emissions. Atmospheric Environment, 123, 200–209. https://doi.org/10.1016/j.atmosenv.2015.10.071

Appendix B References

Phasedown of Hydrofluorocarbons, 40 C.F.R. pt. 84 (2021). https://www.ecfr.gov/current/title-40/part-84

Credits

Lead Fellow

  • Sarah Gleeson, Ph.D.

Contributors

  • Ruthie Burrows, Ph.D.

  • James Gerber, Ph.D.

  • Daniel Jasper

  • Heather McDiarmid, Ph.D. 

  • Alex Sweeney

Internal Reviewers

  • James Gerber, Ph.D.

  • Heather McDiarmid, Ph.D.

  • Amanda D. Smith, Ph.D.

Methods and Supporting Data

  • Greenhouse gas quantity expressed relative to CO₂ with the same warming impact over 100 years, calculated by multiplying emissions by the 100-yr GWP for the emitted gases.

  • Greenhouse gas quantity expressed relative to CO₂ with the same warming impact over 20 years, calculated by multiplying emissions by the 20-yr GWP for the emitted gases.

  • 8th World Congress on Conservation Agriculture

  • Reducing greenhouse gas concentrations in the atmosphere by preventing or reducing emissions.

  • A liquid with a low pH (below 7).

  • The process of increasing acidity.

  • The extent to which emissions reduction or carbon removal is above and beyond what would have occurred without implementing a particular action or solution.

  • An upper limit on solution adoption based on physical or technical constraints, not including economic or policy barriers. This level is unlikely to be reached and will not be exceeded.

  • The quantity and metric to measure implementation for a particular solution that is used as the reference unit for calculations within that solution.

  • A composting method in which organic waste is processed in freestanding piles that can be aerated actively with forced air or passively by internal convection.

  • The interactions of aerodynamic forces and flexible structures, often including the stucture's control system.

  • A process in which microbes break down organic materials in the presence of oxygen. This process converts food and green waste into nutrient-rich compost.

  • Establishment of new forests in areas that did not historically support forests.

  • Land that is used for crop cultivation and livestock grazing, including cropland, meadows, and pastures.

  • Farming practices that work to create socially and ecologically sustainable food production.

  • Addition of trees and shrubs to crop or animal farming systems.

  • Artificial intelligence

  • Automatic leak detection system

  • Abandoned mine methane

  • Spread out the cost of an asset over its useful lifetime.

  • A process in which microorganisms break down organic material in the absence of oxygen. Methane and CO₂ are the main byproducts.

  • A crop that live one year or less from planting to harvest; also called annual.

  • Lacking dissolved oxygen but containing other sources of oxygen bound within molecules that can be stripped and used by microorganisms.

  • aerated static piles

  • Hardware required to support PV modules and arrays, including racking and mounting structures, wires, and other physical components.

  • Building automation system

  • Electric power delivered at a steady, around-the-clock rate, to cover power demand that exists at all times. Baseload power is typically supplied by high availability, low operating-cost plants, such as nuclear or geothermal.

  • A liquid with a high pH (above 7).

  • black carbon

  • Solar panels that generate electricity from sunlight captured on both sides, increasing energy output by reflecting light from the ground and surroundings.

  • Made from material of biological origin, such as plants, animals, or other organisms.

  • A renewable energy source generated from organic matter from plants and/or algae.

  • An energy source composed primarily of methane and CO₂ that is produced by microorganisms when organic matter decomposes in the absence of oxygen.

  • Carbon stored in biological matter, including soil, plants, fungi, and plant products (e.g., wood, paper, biofuels). This carbon is sequestered from the atmosphere but can be released through decomposition or burning.

  • Living or dead renewable matter from plants or animals, not including organic material transformed into fossil fuels. Peat, in early decay stages, is partially renewable biomass.

  • Biogas refined to the same quality as natural gas. CO₂ and impurities are removed, and the biomethane can be distributed and used in existing natural gas technologies.
     

  • A type of carbon sequestration that captures carbon from CO₂ via photosynthesis and stores it in soils, sediments, and biomass, distinct from sequestration through chemical or industrial pathways.

  • A synthetic organic compound used to make a type of hard, clear plastic for food and drink packaging and many consumer goods.

  • A climate pollutant, also called soot, produced from incomplete combustion of organic matter, either naturally (wildfires) or from human activities (biomass or fossil fuel burning).

  • A secure, decentralized way of digitally tracking transactions that could be used to improve the transparency and efficiency of carbon markets. 

  • Fixed income debt instruments focused on sustainable ocean projects. Blue bonds work in the same manner as traditional bonds and may be issued by corporations, financial institutions, and governments.

  • A global initiative launched by Germany and the IUCN in 2011 to restore 150 Mha of land by 2020 and 350 Mha by 2030.

  • High-latitude (>50°N or >50°S) climate regions characterized by short growing seasons and cold temperatures.

  • Balance-of-system

  • bisphenol A

  • Revenue from carbon credits reserved for payout to land- and rights-holders in the event of a disturbance such as a fire; similar to insurance scheme.

  • The components of a building that physically separate the indoors from the outdoor environment.

  • The physical structure that separates a building’s external and internal environments. 

  • Businesses involved in the sale and/or distribution of solution-related equipment and technology, and businesses that want to support adoption of the solution.

  • Compound annual growth rate

  • A chemical reaction involving heating a solid to a high temperature; to make cement clinker, limestone is calcined into lime in a process that requires high heat and produces CO₂.

  • The ratio of the actual electricity an energy technology generates over a period of time to the maximum it could have produced if it operated continuously at full capacity.

  • A four-wheeled passenger vehicle.

  • Average number of people traveling in a car per trip.

  • Technologies that collect CO₂ before it enters the atmosphere, preventing emissions at their source. Collected CO₂ can be used onsite or in new products, or stored long term to prevent release.

  • A greenhouse gas that is naturally found in the atmosphere. Its atmospheric concentration has been increasing due to human activities, leading to warming and climate impacts.

  • Total GHG emissions resulting from a particular action, material, technology, or sector.

  • Amount of GHG emissions released per activity or unit of production. 

  • A marketplace where carbon credits are purchased and sold. One carbon credit represents activities that avoid, reduce, or remove one metric ton of GHG emissions.

  • A colorless, odorless gas released during the incomplete combustion of fuels containing carbon. Carbon monoxide can harm health and be fatal at high concentrations.

  • A credit representing claimed GHG reductions or removals that can be purchased to compensate for an organization’s or individual's own GHG emissions, enabling those emissions to continue.

  • The time it takes for the emissions reduction from a measure to equal the emissions invested in implementing the measure.

  • Activities or technologies that pull CO₂ out of the atmosphere, including enhancing natural carbon sinks and deploying engineered sinks.

  • Long-term storage of carbon in soils, sediment, biomass, oceans, and geologic formations after removal of CO₂ from the atmosphere or CO₂ capture from industrial and power generation processes.

  • The interconnected pool of dissolved inorganic carbon forms in water. Composed of dissolved CO₂, carbonic acid, bicarbonate ions, and carbonate ions.

  • The stocking rate a pasture can sustain without degrading forage supply or vegetation condition.

  • carbon capture and storage

  • carbon capture, utilization, and storage

  • Cooling degree days

  • A binding ingredient in concrete responsible for most of concrete’s life-cycle emissions. Cement is made primarily of clinker mixed with other mineral components.

  • chlorofluorocarbon

  • Processes that use chemical reactions or heat to break down plastic waste into basic molecular components or feedstocks that can then be used to make new plastic products.

  • Process that uses chemical reactions or heat to break down plastic waste into basic molecular components that can be used to make new plastic products.

  • methane

  • A system in which resources, materials, and products are used for as long as possible through reuse, repair, refurbishment, and recycling.

  • Energy sources that have little to no negative environmental or climate impacts during operation relative to fossil fuel–based energy sources.

  • A factor that warms or cools the planet.

  • Gases or particles that have a planet-warming effect when released to the atmosphere. Some climate pollutants also cause other forms of environmental damage.

  • Areas that have natural buffers from local climate change impacts, offering safe havens for species and ecosystems.

  • A binding ingredient in cement responsible for most of the life-cycle emissions from cement and concrete production.

  • A waste management process where waste is made into the same original product, preserving quality and value so materials can be reused multiple times while keeping resources in continuous use.

  • A system that encompasses both forward supply chains (from producer to consumer) and reverse logistics for reuse, recycling, or proper disposal.

  • Coal mine methane

  • Neighbors, volunteer organizations, hobbyists and interest groups, online communities, early adopters, individuals sharing a home, and private citizens seeking to support the solution.

  • A solution that potentially lowers the benefit of another solution through reduced effectiveness, higher costs, reduced or delayed adoption, or diminished global climate impact.

  • The average annual rate at which a value grows over a specified period, assuming profits are reinvested and growth occurs steadily each year.

  • Funding with substantially more generous terms than market loans (typically due to lower interest rates, longer repayment periods, or partial grants) used to support projects with public or development benefits.

  • A farming system that combines reduced tillage, cover crops, and crop rotations.

  • The proportion of water used or applied that is evaporated, transpired, or incorporated into a product and therefore is not returned to the local hydrological system through runoff or leaching.

  • Risk-sharing financial agreements in which two parties (e.g., renewable generator, government) guarantee a fixed price (e.g., electricity price). If market prices fluctuate, one party pays the other the difference.

  • Persistent long, thin clouds that form behind aircraft when water vapor in the exhaust condenses, then freezes into ice crystals at high altitudes. 

  • A measure of the total space cooling demand to maintain an indoor temperature below 24 °C

  • carbon dioxide

  • A  measure standardizing the warming effects of greenhouse gases relative to CO₂. CO₂-eq is calculated as quantity (metric tons) of a particular gas multiplied by its GWP.

  • carbon dioxide equivalent

  • Plant materials left over after a harvest, such as stalks, leaves, and seed husks.

  • A granular material made by crushing broken or waste glass.

  • direct air capture

  • Financial agreements in which government creditors forgive a portion of debt in exchange for specific conservation commitments.

  • The process of cutting greenhouse gas emissions (primarily CO₂) from a particular sector or activity.

  • An industrial process that removes printing ink from used or waste paper fibers, creating clean pulp that can be turned into new paper products.

  • A solution that works slower than gradual solutions and is expected to take longer to reach its full potential.

  • Microbial conversion of nitrate into inert nitrogen gas under low-oxygen conditions, which produces the greenhouse gas nitrous oxide as an intermediate compound.

  • Electronic document that verifies whether a product has been manufactured according to environmental and social standards and/or material origins, environmental impact, and disposal recommendations.

  • Electronic documents that verify whether or not a product has been manufactured according to environmental and social standards and/or material origins, environmental impact, and disposal recommendations.

  • Greenhouse gas emissions produced as a direct result of the use of a technology or practice.

  • Electric power that can be increased, decreased, or turned on/off to match real-time fluctuations in grid conditions. Typically supplied by fast-responding plants such as natural gas, hydroelectric, or battery storage.

  • The inorganic forms of carbon dissolved in seawater. Composed of dissolved CO₂, carbonic acid, bicarbonate ions, and carbonate ions.

  • A process for separating mixtures and purifying chemicals. Distillation can separate blends into components and remove impurities so the chemical can be reused, e.g., as a refrigerant reclamation step.

  • A system of underground distribution pipes that supply heat from centralized sources to a large number of buildings for space and water heating or industrial use.

  • A window consisting of two glass panes separated by a sealed gap and typically filled with air or an inert gas to improve the heat flow resistance.

  • A waste management system that transforms waste into different products of lower quality and value, making materials harder to recycle again and limiting reuse.

  • A measure of how long removed carbon stays out of the atmosphere.

  • Flexible benchmarks derived from independent, publicly available, frequently updated data sets.

  • European Energy Agency

  • Ability of a solution to reduce emissions or remove carbon, expressed in CO₂-eq per installed adoption unit. Effectiveness is quantified per year when the adoption unit is cumulative over time.

  • Enhanced geothermal system

  • Exajoule (one quintillion joules)

  • A process that uses electric current to drive a reaction, such as using electricity to split water molecules into hydrogen and oxygen.

  • Produced by electrolysis.

  • Greenhouse gas emissions accrued over the lifetime of a material or product, including as it is produced, transported, used, and disposed of.

  • Solutions that work faster than gradual solutions, front-loading their impact in the near term.

  • Methane produced by microbes in the digestive tracts of ruminant livestock, such as cattle, sheep and goats.

  • The unintended capture of organisms in intake flows.

  • Environmental Protection Agency

  • Extended Producer Responsibility

  • expanded polystyrene

  • Environmental Research & Education Foundation

  • environmental, social, and governance

  • exchange-traded fund

  • A process triggered by an overabundance of nutrients in water, particularly nitrogen and phosphorus, that stimulates excessive plant and algae growth and can harm aquatic organisms.

  • Electric vehicle

  • The movement of water from the earth’s surface to the atmosphere directly from land or water surfaces (evaporation) and through plant tissues (transpiration).

     

  • The scientific literature that supports our assessment of a solution's effectiveness.

  • A policy framework that assigns responsibility to producers for the end-of-life servicing of their products.

  • A group of human-made molecules that contain fluorine atoms. They are potent greenhouse gases with GWPs that can be hundreds to thousands times higher than CO₂.

  • Food, agriculture, land, and ocean

  • Food and Agriculture Organization of the United Nations

  • feed conversion ratio

  • The efficiency with which an animal converts feed into increased body mass, measured as the ratio of the weight of the feed given to weight gain. Lower FCR means less feed for the same growth.

  • A policy mechanism that incentivizes renewables through contracts that guarantee a set price for the electricity generated.

  • Raw material inputs for manufacturing, processing, and managing waste.

  • Containing or consisting of iron.

  • A measure of fishing activity over time and area, commonly measured by number of trips, vessel time, or gear deployed.

  • A solar PV system with panels mounted at a constant angle.

  • Glass is manufactured by floating molten glass on a molten tin bath, producing a smooth, flat product with high optical clarity, often used for window applications.

  • food loss and waste

  • Food discarded during pre-consumer supply chain stages, including production, harvest, and processing.

  • Food discarded during pre-consumer supply chain stages, including production, harvest, and processing, along with food discarded wt the retail and consumer stages of the supply chain.

  • Food discarded at the retail and consumer stages of the supply chain.

  • Combustible materials found in Earth's crust that can be burned for energy, including oil, natural gas, and coal. They are formed from decayed organisms through prehistoric geological processes.

  • Free, prior, and informed consent

  • A principled process of working with Indigenous communities that requires consent from Indigenous peoples for any decision, action, or activity that impacts their community and/or lands.

  • Unintentional leaks of gases or vapor into the atmosphere.

  • A group of countries representing the majority of the world's population, trade, and GDP. There are 19 member countries plus the European Union and the African Union

  • Gas collection and control system

  • A design or approach to policy, programs, or activities that addresses the different situations, roles, needs, and interests of women, men, girls, and boys.

  • Manipulating the environment to influence the quantities or impact of climate pollutants in the atmosphere.

  • Heavy-duty, low-permeability liners made mostly from synthetic plastics or rubber, used to block the movement of liquids or gases in engineered storage sites.

  • greenhouse gas

  • Global horizontal irradiance

  • gigajoule or billion joules

  • The glass layers or panes in a window.

  • The intensity of all solar radiant energy on a horizontal surface over a specific time frame, which limits PV power output. Measured as energy per area per year (kWh/m2/yr).

  • A measure of how effectively a gas traps heat in the atmosphere relative to CO₂. GWP converts greenhouse gases into CO₂-eq emissions based on their 20- or 100-year impacts.

  • A solution that has a steady impact on the atmosphere. Effectiveness is expected to be constant over time rather than having a higher impact in the near or long term.

  • A system that uses the slope of a field and furrows, borders, or flooding to apply water without pumping.

  • Hydrogen produced from natural gas, most commonly by combining heated steam with methane. Producing grey hydrogen emits CO₂ and leaks methane. Most hydrogen made today is grey.

  • A fixed income debt instrument focused on sustainable projects. Green bonds work in the same manner as traditional bonds and may be issued by corporations, financial institutions, and governments.

  • A fixed income debt instrument focused on sustainable projects. They work in the same manner as traditional bonds and may be issued by corporations, financial institutions, and governments.

  • Hydrogen gas made through electrolysis using electricity produced onsite using renewable energy sources.

  • The practice of charging more for renewable energy than for conventional energy to cover added costs .

  • Roofs that are designed to be partially or completely covered in vegetation.

  • Biomass discarded during landscaping and gardening.

  • A gas that traps heat in the atmosphere, contributing to climate change.

  • The makeup of electricity generation on a power grid, showing the share contributed by various energy sources (e.g., coal, natural gas, nuclear, wind, solar, hydro) relative to total electricity production.

  • A process by which GHGs dissolved in groundwater are released to the atmosphere when the groundwater is extracted from the aquifer.

  • metric gigatons or billion metric tons

  • global warming potential

  • A low-carbon steel-making technology that uses hydrogen from water, direct reduction of iron, and electric arc furnaces. 

  • hectare

  • household air pollution

  • A sector or process that is exceptionally challenging to decarbonize, often because of a lack of mature technology options.  

  • hydrochlorofluorocarbon

  • Number of years a person is expected to live without disability or other limitations that restrict basic functioning and activity.

  • A measure of the total space heating demand to maintain an indoor temperature above 18 °C

  • A unit of land area comprising 10,000 square meters, roughly equal to 2.5 acres.

  • Hybrid electric car

  • hydrofluorocarbon

  • hydrofluoroolefin

  • hydrofluoroolefin

  • high-income countries

  • Metal waste that is produced at a mill or foundry during the metal production process and recycled internally.

  • Particles and gases released from use of polluting fuels and technologies such as biomass cookstoves that cause poor air quality in and around the home.

  • heating, ventilation, air conditioning, and refrigeration

  • Organic compounds that contain hydrogen and carbon.

  • Human-made F-gases that contain hydrogen, fluorine, and carbon. They typically have short atmospheric lifetimes and GWPs hundreds or thousands times higher than CO₂. 

  • Human-made F-gases that contain hydrogen, fluorine, and carbon, with at least one double bond. They have low GWPs and can be climate-friendly alternatives to HFC refrigerants.

  • A recycling process that separates fibers from contaminants for reuse. Paper or cardboard is mixed with water to break down fibrous materials into pulp.

  • internal combustion engine

  • International Energy Agency

  • Aerobic decomposition of organic waste in a sealed container or bin/bay system. 

  • Greenhouse gas emissions produced as a result of a technology or practice but not directly from its use.

  • Land use change that supply or demand of agricultural products in one location induce in another location.

  • A solid block of purified silicon formed by melting and crystallizing raw silicon; it serves as the base material for slicing into wafers used in solar cells.

  • Device used to power vehicles by the intake, compression, combustion, and exhaust of fuel that drives moving parts.

  • The annual discount rate that balances net cash flows for a project over time. Also called IRR, internal rate of return is used to estimate profitability of potential investments.

  • Individuals or institutions willing to lend money in search of a return on their investment.

  • Intergovernmental Panel on Climate Change

  • Indigenous peoples’ land

  • Integrated pest management.

  • internal rate of return

  • The timing and amount of irrigation water applied.

  • International Union for Conservation of Nature

  • The most comprehensive global list of species threatened with extinction, maintained by the International Union for Conservation of Nature.

  • International agreement adopted in 2016 to phase down the use of high-GWP HFC F-gases over the time frame 2019–2047.

  • A measure of energy equivalent to the energy delivered by 1,000 watts of power over one hour.

  • kiloton or one thousand metric tons

  • kilowatt-hour

  • The intentional or unintentional act of property use crossing ownership boundaries without permission.

  • A measure of land use efficiency that compares combined system productivity to single-use alternatives. A land equivalent ratio above 1.0 indicates dual-use systems have higher output than separate implementation.

  • A land-holding system, e.g. ownership, leasing, or renting. Secure land tenure means farmers or other land users will maintain access to and use of the land in future years.

  • Gases, mainly methane and CO₂, created by the decomposition of organic matter in the absence of oxygen.

  • levelized cost of electricity

  • leak detection and repair

  • Regular monitoring for fugitive methane leaks throughout oil and gas, coal, and landfill sector infrastructure and the modification or replacement of leaking equipment.

  • Relocation of economic markets, environmental impacts, or emissions-causing activities from one area to another as a result of a mitigation action, reducing or offsetting the intended benefit.

  • The rate at which solution costs decrease as adoption increases, based on production efficiencies, technological improvements, or other factors.

  • Percent decrease in costs per doubling of adoption.

  • A metric describing the expected break-even cost of generating electricity per megawatt-hour ($/MWh), combining costs related to capital, operation, and fuel (if used) and dividing by total output over the generator's lifetime.

  • landfill gas

  • Greenhouse gas emissions from the sourcing, production, use, and disposal of a technology or practice.

  • A process that converts biomass, plastics, or other solid wastes into liquid fuel or chemicals.

  • The total weight of an organism before any meat processing.

  • low- and middle-income countries

  • liquefied petroleum gas

  • land use change

  • A measure of the amount of light produced by a light source per energy input.

  • live weight

  • marginal abatement cost curve

  • Livestock grazing practices that strategically manage livestock density, grazing intensity, and timing. Also called improved grazing, these practices have environmental, soil health, and climate benefits, including enhanced soil carbon sequestration.

  • Intertidal coastal wetlands with salt-tolerant trees and shrubs found in tropical and subtropical regions.

  • A tool to measure and compare the financial cost and abatement benefit of individual actions based on the initial and operating costs, revenue, and emission reduction potential.

  • Periods of unusually warm ocean temperatures that typically last from days to months and can affect large areas of the ocean.

  • Defined by the International Union for Conservation of Nature as: "A clearly defined geographical space, recognised, dedicated and managed, through legal or other effective means, to achieve the long-term conservation of nature with associated ecosystem services and cultural values." References to PAs here also include other effective area-based conservation measures defined by the IUCN. 

  • A facility that receives recyclable waste from residential, commercial, and industrial sources; separates, processes, and prepares them; and then sells them to manufacturers for reuse in new products.

  • A measure of energy equivalent to the energy delivered by one million watts of power over one hour.

  • A greenhouse gas with a short lifetime and high GWP that can be produced through a variety of mechanisms including the breakdown of organic matter.

  • A measure of mass equivalent to 1,000 kilograms (~2,200 lb), also known as tonne.

  • million hectares

  • The natural process by which microbes convert matter to energy, often producing CO₂ or other GHGs as a byproduct.

  • Soils mostly composed of inorganic materials formed through the breakdown of rocks. Most soils are mineral soils, and they generally have less than 20% organic matter by weight.

  • A localized electricity system that independently generates and distributes power. Typically serving limited geographic areas, mini-grids can operate in isolation or interconnected with the main grid.

  • Reduce adverse impact of

  • A reduction in adverse impact

  • megajoule or one million joules

  • Digital platform that integrates transport modes such as public transit, carpooling, and bike sharing into a single service, allowing users to plan, book, and pay for multimodal trips through one application.

  • Percent of trips made by different passenger and freight transportation modes.

  • A condition of being diseased, unhealthy, or injured.

  • Marine Protected Area

  • materials recovery facility

  • monitoring, reporting, and verification

  • Municipal solid waste

  • megaton or million metric tons

  • Materials discarded from residential and commercial sectors, including organic waste, glass, metals, plastics, paper, and cardboard.

  • megawatt

  • Megawatt-hour

  • micro wind turbine

  • square meter kelvins per watt (a measure of thermal resistance, also called R-value)

  • nitrous oxide

  • The enclosed housing at the top of a wind turbine tower that contains the main mechanical and electrical components of the turbine.

  • A commitment from a country to reduce national emissions and/or sequester carbon in alignment with global climate goals under the Paris Agreement, including plans for adapting to climate impacts.

  • A gaseous form of hydrocarbons consisting mainly of methane.

  • Chemicals found in nature that are used for cooling and heating, such as CO₂, ammonia, and some hydrocarbons. They have low GWPs and are ozone friendly, making them climate-friendly refrigerants.

  • The rate of primary production for photosynthetic organisms, excluding the carbon they respire for their own metabolic processes.

  • The rate at which photosynthetic organisms convert carbon dioxide into organic matter, minus the carbon they respire for their own metabolic processes.

  • Microbial conversion of ammonia or ammonium to nitrite and then to nitrate under aerobic conditions.

  • A group of air pollutant molecules composed of nitrogen and oxygen, including NO and NO₂.

  • A greenhouse gas produced during fossil fuel combustion and agricultural and industrial processes. N₂O is hundreds of times more potent than CO₂ at trapping atmospheric heat, and it depletes stratospheric ozone.

  • Metals or alloys that do not contain significant amounts of iron.

  • Social welfare organizations, civic leagues, social clubs, labor organizations, business associations, and other not-for-profit organizations.

  • A material or energy source that relies on resources that are finite or not naturally replenished at the rate of consumption, including fossil fuels like coal, oil, and natural gas.

  • nitrogen oxides

  • Net primary production

  • nitrous oxide

  • The process of increasing the acidity of seawater, primarily caused by absorption of CO₂ from the atmosphere.

  • Organisation for Economic Co-operation and Development

  • An agreement between a seller who will produce future goods and a purchaser who commits to buying them, often used as project financing for producers prior to manufacturing.

  • Waste made of plant or animal matter, including food waste and green waste.

  • Systems to connect buyers with a network of smallholder farmers to stabilize supply and demand (sometimes called "contract farming.”

  • organic waste

  • Protected area

  • Protected Area

  • A certification that verifies a metric ton of packaging waste has been recovered and is being exported for reprocessing.

  • A certification that verifies a metric ton of packaging waste has been recovered and reprocessed.

  • Productive use of wet or rewetted peatlands that does not disturb the peat layer, such as for hunting, gathering, and growing wetland-adapted crops for food, fiber, and energy.

  • A legally protected area that lacks effective enforcement or management, resulting in minimal to no conservation benefit.

  • Airborne particles composed of solids and liquids.

  • A measure of transporting one passenger over a distance of one kilometer.

  • Incentive payments to landowners or managers to conserve natural resources and promote healthy ecological functions or ecosystem services.

  • An organic, carbon-rich soil layer made of partially decomposed dead plant material that accumulates under low-oxygen conditions.

  • Small, hardened pieces of plastic made from cooled resin that can be melted to make new plastic products.

  • Transitional zone between urban and rural areas that combines features of both such as housing, farms, lower-density development, and mixed land uses.

  • The longevity of any greenhouse gas emission reductions or removals. Solution impacts are considered permanent if the risk of reversing the positive climate impacts is low within 100 years.

  • Packaging waste export recovery note

  • High-efficiency solar cells with a traditional silicon base and a thin-film perovskite layer on top that allows the combined cell to capture more energy without significantly increasing its size.

  • Advanced solar cells combining perovskite and silicon layers to capture more of the solar spectrum, achieving higher efficiency than conventional silicon cells.

  • Payments for ecosystem services

  • A mixture of hydrocarbons, small amounts of other organic compounds, and trace amounts of metals used to produce products such as fuels or plastics.

  • Per- and polyfluoroalkyl substances, a class of synthetic chemicals that do not degrade easily in the environment. They can pollute the environment and can have negative impacts on human health.

  • A measure of the acidity (pH<7) or alkalinity (pH>7) of a solution.

  • Reduce the use of a material or practice over time.

  • Eliminate the use of a material or practice over time.

  • Plug-in hybrid electric car

  • Private, national, or multilateral organizations dedicated to providing aid through in-kind or financial donations.

  • A chemical or material that initiates or accelerates a chemical reaction when exposed to light without being consumed.

  • An atmospheric reaction among sunlight, VOCs, and nitrogen oxide that leads to ground-level ozone formation. Ground-level ozone, a component of smog, harms human health and the environment.

  • The process by which certain materials, such as those in solar cells, convert sunlight into electricity by releasing electrons.

  • The process by which sunlight is converted into electricity. When light hits certain materials, such as those in solar panels, it mobilizes electrons, creating an electric current.

  • A family of synthetic organic compounds used to make plastics softer, more flexible, and durable. They are added to a wide range of plastics for consumer and industrial uses.

  • polyisocyanurate

  • The adjustment of turbine blade angles around their long axis in which a control system rotates blades slightly forward or backward to regulate wind capture and optimize electricity generation.

  • passenger kilometer

  • particulate matter

  • Particulate matter 2.5 micrometers or less in diameter that can harm human health when inhaled.

  • Elected officials and their staff, bureaucrats, civil servants, regulators, attorneys, and government affairs professionals.

  • System in a vehicle that generates power and delivers it to the wheels. It typically includes an engine and/or motor, transmission, driveshaft, and differential.

  • Purchase Power Agreement.

  • Purchase Power Agreements

  • Parts per million

  • People who most directly interface with a solution and/or determine whether the solution is used and/or available. 

  • A chemical reaction that creates a solid from a solution.

  • A substance that is the starting material for a chemical reaction that forms a different substance.

  • Extraction of naturally occurring resources from the Earth, including mining, logging, and oil and gas refining. These resources can be used in raw or minimally processed forms to produce materials.

  • The process of converting inorganic matter, including carbon dioxide, into organic matter (biomass), primarily by photosynthetic organisms such as plants and algae.

  • Packaging waste recovery note

  • Defined by the International Union for the Conservation of Nature as "A clearly defined geographical space, recognised, dedicated and managed, through legal or other effective means, to achieve the long-term conservation of nature with associated ecosystem services and cultural values". References to PAs here also include other effective area-based conservation measures defined by the IUCN. 

  • A process that separates and breaks down wood and other raw materials into fibers that form pulp, the base ingredient for making paper products.

  • polyurethane

  • Long-term contract between a company (the buyer) and a renewable energy producer (the seller).

  • Long-term contracts between a company (the buyer) and a renewable energy producer (the seller).

  • photovoltaic

  • Petawatt-hour, equal to 1 billion MWh

  • research and development

  • An atom, molecule, or ion that contains at least one unpaired valence electron, making it highly reactive and often short-lived.

  • A situation in which improvements in efficiency or savings lead to consumers increasing consumption, partially or fully offsetting or exceeding the emissions or cost benefits.

  • renewable energy certificate

  • Chemical or mixture used for cooling and heating in refrigeration, air conditioning, and heat pump equipment. Refrigerants absorb and release heat as they move between states under changing pressure.

  • The amount of refrigerant needed for a particular refrigeration, air conditioning, or heat pump system.

  • Adding refrigerant to equipment to reach its correct amount (called refrigerant charge). Charging is performed by a trained technician during manufacturing, installation, and maintenance after evacuating air and contaminants.

  • A group of approaches to farming and ranching that emphasizes enhancing the health of soil by restoring its carbon content and providing other benefits to the farm and surrounding ecosystem.

  • A solution that can increase the beneficial impact of another solution through increased effectiveness, lower costs, improved adoption, enhanced global climate impact, and/or other benefits to people and nature.

  • A material or energy source that relies on naturally occuring and replenishing resources such as plant matter, wind, or sunlight.

  • A market-based instrument that tracks ownership of renewable energy generation.

  • The moldable form of raw plastic material, created by melting down waste or virgin plastics and serving as the building block for creating new plastic goods.

  • The process of moving items from end users (e.g., consumers) back to the sellers, manufacturers, or salvagers for reuse, recycling, or disposal. This can include transportation, cleaning, sorting, and more.

  • The risk that removed or stored carbon can be released into the atmosphere. Lower reversibility means the carbon is more securely stored.


     

  • Hiring a vehicle to take a passenger or passengers to a particular destination.

  • U.N. treaties to combat climate change, biodiversity loss, and desertification. They include the U.N. Framework Convention on Climate Change (UNFCCC), the Convention on Biological Diversity (CBD), and the U.N. Convention to Combat Desertification (UNCCD).

  • A class of animals with complex stomachs that can digest grass. Most grazing livestock are ruminants including cows, sheep, and goats along with several other species.

  • sustainable aviation fuel

  • A wetland ecosystem regularly flooded by tides and containing salt-tolerant plants, such as grasses and herbs.

  • Intertidal coastal wetlands with salt-tolerant plants.

  • An ecosystem characterized by low-density tree cover that allows for a grass subcanopy.

  • Very large or small numbers are formatted in scientific notation. A positive exponent multiplies the number by powers of ten; a negative exponent divides the number by powers of ten.

  • Seasonal coefficient of performance

  • Sustainable Development Goals

  • Average units of heat energy released for every unit of electrical energy consumed, used to measure heat pump efficiency.

  • A single pane window (glass and frame) added to an existing single-glazed window, converting the unit into double glazing, with each pane independently operable.

  • A practice in which multiple utility companies own and operate high-voltage power lines, sharing both costs and benefits.

  • Greenhouse gases and other climate-impacting compounds with much shorter atmospheric lifetimes than CO₂. These include methane, certain F-gases, black carbon, and tropospheric ozone. Mitigating these emissions has a near-term impact.

  • A window consisting of one glass pane without any additional insulating layers.

  • Small-scale family farmers and other food producers, often with limited resources, usually in the tropics. The average size of a smallholder farm is two hectares (about five acres).

  • Devices that control indoor temperature according to user-defined schedules or conditions.

  • soil organic carbon

  • The process of using direct, real-world observations to verify, validate, and/or improve data and models about social systems, often using in-person observations in the field.

  • Carbon stored in soils, including both organic (from decomposing plants and microbes) and inorganic (from carbonate-containing minerals).

  • Carbon stored in soils in organic forms (from decomposing plants and microbes). Soil organic carbon makes up roughly half of soil organic matter by weight.

  • Biologically derived matter in soils, including living, dead, and decayed plant and microbial tissues. Soil organic matter is roughly half carbon on a dry-weight basis.

  • A measure of the intensity of solar radiant energy on a surface, measured in watts per square meter (W/m2) or power per unit area.

  • Reducing global warming by increasing how much of the sun's radiation is reflected back to space and/or decreasing how much of the Earth's radiative heat is trapped in the atmosphere. 

  • A material's ability to reflect solar radiation incident on its surface, often reported as a fraction or percentage.

  • soil organic matter

  • A substance that takes up another liquid or gas substance, either by absorbtion or adsorption.

  • sulfur oxides

  • sulfur dioxide

  • The rate at which a climate solution physically affects the atmosphere after being deployed. At Project Drawdown, we use three categories: emergency brake (fastest impact), gradual, or delayed (slowest impact).

  • Climate regions between latitudes 23.4° to 35° above and below the equator characterized by warm summers and mild winters.

  • A polluting gas produced primarily from burning fossil fuels and industrial processes that directly harms the environment and human health.

  • A group of gases containing sulfur and oxygen that predominantly come from burning fossil fuels. They contribute to air pollution, acid rain, and respiratory health issues.

  • Processes, people, and resources involved in producing and delivering a product from supplier to end customer, including material acquisition.

  • Sport utility vehicle

  • A mixture of hydrogen, carbon monoxide, and other gases, used to produce chemicals like ammonia and methanol, or as a synthetic fuel made from non-fossil feedstocks, including biomass and waste.

  • metric ton

  • metric tons

  • Technology developers, including founders, designers, inventors, R&D staff, and creators seeking to overcome technical or practical challenges.

  • Climate regions between 35° to 50° above and below the equator characterized by moderate mean annual temperatures and distinct seasons, with warm summers and cold winters.

  • A measure of energy equivalent to the energy delivered by one trillion watts of power over one hour.

  • trifluoroacetic acid

  • A measurement indicating the ability of a material to release heat after it has been absorbed.

  • A measure of how well a material prevents heat flow, often called R-value or RSI-value for insulation. A higher R-value means better thermal performance.

  • A measure of the rate of heat flow or heat transfer through a material or building component. A lower U-value means better thermal performance.

  • Individuals with an established audience for their work, including public figures, experts, journalists, and educators.

  • Charges for disposal of materials paid to facility operators. Fees can be charged per ton of waste disposed or based on economic indicators such as the Consumer Price Index.

  • A solar PV systems with panels that move automatically to follow the sun’s path, maximizing energy capture and improving efficiency over fixed systems.

  • A window consisting of three panes of glass separated by two insulating inert gas-filled layers, providing more heat flow resistance than single or double glazing.

  • Low-latitude (23.4°S to 23.4°N) climate regions near the Equator characterized by year-round high temperatures and distinct wet and dry seasons.

  • Terawatt, equal to 1,000 gigawatts

  • terawatt-hour

  • United Nations

  • United Nations Environment Programme

  • U.S. Composting Council

  • Ventilation air methane

  • Self-propelled machine for transporting passengers or freight on roads.

  • A measure of one vehicle traveling a distance of one kilometer.

  • How easily and reliably a carbon‑removal claim can be measured and independently confirmed as accurate; part of measurement, reporting and verification (MRV) for carbon removal.

  • Aerobic decomposition of organic waste by earthworms and microorganisms.

  • vehicle kilometer

  • volatile organic compound

  • Gases made of organic, carbon-based molecules that are readily released into the air from other solid or liquid materials. Some VOCs are greenhouse gases or can harm human health.

  • watt (a measure of power or energy transfer.)

  • Watts per square meter Kelvin

  • A thin, flat slice of silicon cut from an ingot and processed to create individual solar cells that convert sunlight into electricity.

  • Landscape waste, storm debris, wood processing residues, and recovered post-consumer wood.

  • A framework for waste management that ranks options by their sustainability: 1) prevent (do not purchase unnecessary waste), 2) reduce, 3) reuse, 4) recycle, 5) recover, 6) dispose.

  • A measure of how much free water is available for microbes to use. It ranges from 0 (completely dry) to 1 (pure water), and low values (<0.60) indicate conditions too dry for microbes to function.

  • A measure of power equal to one joule per second.

  • World Conservation Monitoring Centre

  • Using strategies such as insulation, air sealing, ventilation, and moisture control to upgrade a building’s exterior structure, making indoors more comfortable and energy efficient.

  • Aerobic decomposition of organic waste in long, narrow rows called windrows. Windrows are generally twice as long as they are wide.

  • A subset of forest ecosystems that may have sparser canopy cover,  smaller-stature trees, and/or trees characterized by basal branching rather than a single main stem.

  • extruded polystyrene

  • The rotation of the nacelle (the enclosed housing at the top of a wind turbine tower that contains the main mechanical and electrical components of the turbine) so that the rotor blades are always facing directly into the wind.

  • year-over-year

  • year